Tapco Slate Dry Verge Continuous Verge for Slate Black, 2m long Lightweight and tough dry verge Lightweight, durable and extremely robust dry verges for natural and synthetic slates up to 6mm thickness. Dry Verge protects verge tiles from wind uplift and driving rain and is not vulnerable to cracking as a result of weathering and movement. Tested to survive 110MPH winds and keep water out. Features & Benefits Natural or synthetic tiles - use with most natural and synthetic slates upto 6mm (19/32") thick No weathering - does not crack due to movement or weathering like bedded mortar Neat finish - attractive continuous edge to the roof Windproofs - prevents wind from getting behind the tiles and lifting them off the roof Strong and durable - under normal service conditions they will provide a durable covering with a service life of in excess of 20 years Quick and easy fitting - loved by slaters, once they have used the product, for many of the above benefits Kind to environment - made from recyclable plastic and dolomite limestone Lightweight - only 12kg/sq metre BBA & BS Certified - complies with BS476 part 3 - an AA fire rating is achieved for insulation on boarded roofs 50 year guarantee - limited lifetime 50 year warranty Tapco Slate roofing materials are the perfect modern alternative to natural slate. Made from a recyclable blend of dolomite limestone and polypropylene, the synthetic tiles/shingles and ridge look virtually identical to their natural counterparts. Technical Information MeasurementValue Length 2m Colour Black Material Recyclable plastic and dolomite limestone Weight 2kg per m2 Standards BS476 Part 3, BBA Guarantee 50 Years

Easy Verge U from Easy Trim is super quick to fit - 36 units in 5 mins! Universal Dry Verge Roof Kit for Gable End (Choice of Ridge Cap, Colour and Pack Size) No nonsense, easy-fit system! Mortar-free, maintenance-free method of securing almost any tile type along roof verge. Includes universal units, ridge end cap and starter pack. Unique design combines ease of installation with exceptional holding, so tiles are held firmly in place and not vulnerable to wind dislodgement. It's super quick too - 36 units in 5 mins! Features & Benefits Universally handed - no need for left and right units Quick fit design - 36 units in under 5 minutes Versatile - fit to any type of roof tile High compression - roof tiles held firm in strong winds Zero maintenance - years of mortar free protection High quality - tough and UV stable plastic COMPATIBILITY - EasyVerge U Dry Verge Units are compatible with most makes and profiles of interlocking tiles with batten gauge between 290mm - 345mm and suitable for pitches between 15° and 45°. Technical Information MeasurementValue Material PVC-u Size (length x height) Dry Verge Unit - 408mm x 170mm Ridge End Cap - 265mm x 240mm Contents Universal Dry Verge Units (pack sizes of 10, 12, 16, 20, 24, 28, 32, 36 and 40 units)Ridge End Cap (domed or angled)Starter Pack Compatibility EasyVerge U Dry Verge Units are compatible with most makes and profiles of interlocking tiles with batten gauge between 290mm - 345mm and suitable for pitches between 15° and 45°. * Option to add extra units when ordering. Quick and Easy Fitting The unique design of Easy Verge U means that it can be fitted extremely quickly. In fact, this video demo shows that it's possible to fit a whole gable end of 36 units in under 5 minutes! Basic Procedure Fit optional Starter to low end of verge Position Unit over Starter with top flap over first tile Push upwards to engage with Starter and trap flap under overlapping tile Fix in place through a pre-drilled fixing hole with ring shank nails Hook next Unit under previous and pull top flap up and over Push Unit upwards engaging with previous and align with tile Nail the Unit in place and repeat for remaining units * The above fitting notes are intended as a guide, not comprehensive instructions.

Steel Grey Tapco Ridge Tile Roof with Tapco Slate Tile Complete synthetic roof system Synthetic Slate Ridge Tile from Tapco Traditional slate appearance to the ridge Authentic synthetic slate ridge tile. Lightweight, durable and extremely robust. Moulded from casts of natural slate, they provide an authentic texture that looks amazing - year after year, and is tested to survive 110mph winds and keep water out. The ridge tiles are flexible with a reinforced crease, which allows them to be used on pitches from 14° to over 30°.The tiles also feature a tapered end that allows the ridge tile to sit neatly and naturally overlap the adjooining ridge tile for windtight and tidy appearance. Did you know? Ridge tiles feature exposure markings, just like the regular tile, so they can be easily aligned with uniform spacing. Features & Benefits Lightweight - just 12Kg/m² so easy to handle and needs less support Authentic appearance - real slate moulds and random textures Uplift resistance - built-in InFlex camber for tighter fit Consistent size - no need to sort tiles by thickness Easy preparation - easy to cut and no need to drill Faster fitting - nail, exposure and spacing markings Super strong - wont crack/break if dropped or walked on Non-fading - protection against fading under sunlight Lifetime warranty - fit with confidence Low-Pitch use - can use on roofs as low as 14° Complete system - compatible ridge tiles, top caps and breathable membrane BBA & BS Certified - complies with BS476 Part 3 - an AA fire rating is achieved for insulation on boarded roofs 100% Recyclable - conserve natural resources and reduce landfill Blended from dolomite limestone and polypropylene, they are over 50% lighter and much less fragile than natural slate, so easier to handle too. Being tougher, they can be walked on during installation, without risk of cracking. This fact alone can reduce wastage by 15%. They're also easy to cut and fit, so quick to install. It's no wonder that roofing contractors love to work with them. Technical Information MeasurementValue Size 152mm x 457mm (6" x 18") Weight Nominal 0.7 Kg Material Recyclable blend of limestone and polypropylene Batten Size 38mm x 25mm (1.5" x 1") Minimum Pitch 14° (fully boarded roof)22.5° (felt/batten roof) Maximum Pitch 90° Fixing Large-headed galvanised steel nails - 30mm (1.5") by 2.5mm (0.1") using hammer or nail gun. Aluminium or Copper nails may also be used but driving them through the slate may cause bending. Longer 76mm (3") nail required for fixing ridge and hips Cutting Fine-toothed handsaw, jigsaw, circular saw, or sharp utility blade Storage/Temperature Must be conditioned at a temperature no lower than 7° for 24 hours prior to use. May be installed in temperatures as low as 0° but must be hand fastened. Tapco recommends fastening with a pneumatic gun in temperatures above 7° Colour Steel Grey (formerly Pewter Grey) Ridge Coverage 5.5 per linear metre Fitting Information The material and the moulded markings on each slate make fitting Tapco Synthetic Ridge Tile a dream. Comprehensive fitting instructions are available if required.

EasyVerge U Dry Verge Unit (Available in Grey, Brown, Terracotta and Black) No nonsense - one units does left or right! High quality, UV stable plastic dry verge units that can be used either way round, so no need for separate left and right units. Installs quickly and easy with almost any tile type. Mortar-free, maintenance-free method of securing almost any tile type along roof verge. Unique design combines ease of installation with exceptional holding, so tiles are held firmly in place and not vulnerable to wind dislodgement. Features & Benefits Universally handed - no need for left and right units Quick fit design - 36 units in under 5 minutes Versatile - fit to any type of roof tile High compression - roof tiles held firm in strong winds Zero maintenance - years of mortar free protection High quality - tough and UV stable plastic Mortar-free - eaves remains protected but well ventilated Technical Information MeasurementValue Colour Grey, Brown, Terracotta or Black Material PVC-u Length 410mm Height 168mm Depth 50mm Tile Compatibility EasyVerge U Dry Verge Units are compatible with most makes and profiles of interlocking tiles. Batten Gauge 290mm – 345mm Roof Pitch 15° to 45° Quick and Easy Fitting The unique design of Easy Verge U means that it can be fitted extremely quickly. In fact, this video demo shows that it's possible to fit a whole gable end of 36 units in under 5 minutes! Basic Procedure Fit optional Starter to low end of verge Position Unit over Starter with top flap over first tile Push upwards to engage with Starter and trap flap under overlapping tile Fix in place through a pre-drilled fixing hole with ring shank nails Hook next Unit under previous and pull top flap up and over Push Unit upwards engaging with previous and align with tile Nail the Unit in place and repeat for remaining units * The above fitting notes are intended as a guide, not comprehensive instructions.

Steel Grey Tapco Slate Tile Roof with Tapco Slate Tile Tapco Slate solid roof conversion Versatile synthetic roof tile Complete synthetic roof system Synthetic Slate Roof Tiles from Tapco 290mm x 445mm Tough and lightweight imitation roof slate Authentic natural slate colour. Modern, unbreakable alternative to natural slate tile for new build and re-roofing projects. Lighter, tougher and easier to work with than real slate. Moulded from casts of natural slate, they provide an authentic texture that looks amazing - year after year, with the advantage that they do not crack, curl or fade. Designed with a curvature, called InFlexTM, to provide a secure and watertight fit that resists uplift and winds up to 110mph. Installs Quickly, Looks Great, Lasts Long Available in a range of different colours, these faux roofing tiles give homeowners, designers and architects the freedom to express. Blended from dolomite limestone and polypropylene, they are over 50% lighter and much less fragile than natural slate, so easier to handle too. Being tougher, they can be walked on during installation, without risk of cracking. This fact alone can reduce wastage by 15%. They're also easy to cut and fit, so quick to install. It's no wonder that roofing contractors love to work with them. Features & Benefits Lightweight - just 12kg/m² so easy to handle and needs less support Authentic appearance - real slate moulds and random textures Uplift resistance - built-in InFlex camber for tighter fit Consistent size - no need to sort tiles by thickness Easy preparation - easy to cut and no need to drill Faster fitting - nail, exposure and spacing markings Super strong - wont crack/break if dropped or walked on Non-fading - protection against fading under sunlight Lifetime warranty - fit with confidence Low-Pitch use - can use on roofs as low as 14° Complete system - compatible ridge tiles, top caps and breathable membrane BBA amp; BS Certified - complies with BS476 Part 3 - an AA fire rating is achieved for insulation on boarded roofs 100% Recyclable - conserve natural resources and reduce landfill Special Features of Tapco Slate Centre Line - quick positioning of tile Exposure Gauge - overlap consistently Horizontal Spacers - space evenly across batten Nail Targets - fix easily with no need to drill. Markings for Half-Slate cuts included Technical Information MeasurementValue Colour Steel Grey (formerly Pewter Grey) Size 295mm x 445mm x 5mm (11.6" x 17.5" x 0.19") Weight Nominal 0.65 Kg Material Recyclable blend of limestone and polypropylene Batten Size 38mm x 25mm (1.5" x 1") Pitch 14° to 90° Fixing Large-headed galvanised steel nails - 30mm (1.5") by 2.5mm (0.1") using hammer or nail gun. Aluminium or Copper nails may also be used but driving them through the slate may cause bending. Longer 76mm (3") nail required for fixing ridge and hips Cutting Fine-toothed handsaw, jigsaw, circular saw, or sharp utility blade Storage/Temperature Must be conditioned at a temperature no lower than 7° for 24 hours prior to use. May be installed in temperatures as low as 0° but must be hand fastened. Tapco recommends fastening with a pneumatic gun in temperatures above 7° Fitting Information The material and the moulded markings on each slate make fitting Tapco Synthetic Tile a dream. Comprehensive fitting instructions are available if required and the following table will help judge the quantity of tile required. PitchGaugeSlates 14 to 22.5° (fully boarded) 6" (152mm) 22 per m2 22.5 to 25° (fully boarded, or felt and batten) 6" (152mm) 22 per m2 25 to 27.5° (fully boarded, or felt and batten) 6.5" (165mm) 20 per m2 27.5 to 30° (fully boarded, or felt and batten) 7" (178mm) 19 per m2 Over 30° (fully boarded, or felt and batten) 7.5" (191mm) 18 per m2