Anti-Mould Bathroom and Kitchen Silicone White, 310ml (EU3 cartridge) Guaranteed to prevent mould for up to 10 years! White, flexible and permanently waterproof sealant that is ideal for sealing in areas of high humidity. Designed specifically for use in kitchens, showers, baths, wet rooms and around sanitary ware and is effective around windows and door frames in areas that have high condensation levels. Xtreme offers primerless adhesion to Enamel, Tiles & Glazed Ceramics, Glass & Polycarbonate Glass (Plexiglass), Stainless Steal, Acrylics and Wood, Stainless steel, Aluminium & Chrome, Concrete & Brick when used in conjunction with a primer. Conforms to ISO 11600 and complies with Material Class B2 according to DIN 4102. Features & Benefits Powerful anti-fungal biocide - prevents mould growth Guaranteed for 10 years - prevent black mould in bathrooms and kitchens Resistance to chemicals - protects against discolouration Easy to apply - good tooling characteristics Free Nozzle Cap - stops drying up, so no more waste Permanently flexible - no cracking Technical Information MeasurementValue MeasurementValue Raw Material Base Acetoxy curing silicone polymer Skinning Time 12 mins @ 23°C/50% relative humidity Curing Time approx 2-3 mins after 24 hrs @ 23°C/50% relative humidity Thermal Stability -40°C to +150°C Application Temperature +1°C to +40°C Shore A Hardness Approx 23 Density Approx 1.0 g/cm3 Elongation at rupture with 2mm film Approx 300% Shelf Life at least 12 months Limitations Due to the large number of existing paint systems, it is necessary to conduct a compatibility test to ensure suitability. There is also danger of yellowing on contact with white alkyd resin paint. Risk of corrosion when used on bare iron or nonferrous metals.

Stay Fresh Sanitary Sealant from Soudal (Choice of colour available) Designed for Kitchens and Bathrooms! Anti-mould and food safe silicone with great temperature resistance, for kitchens and bathrooms. This Low Modulus Neutral cure (LMN) silicone sealant, offers primerless adhesion to all sanitary materials. Stay Fresh from Soudal is thick-bodied, highly elastic and has a very fast-skinning time and final cure. 300ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Features & Benefits Anti-fungicidal and anti-biocidal Food safe and virtually odourless Conforms to ISO 11600 F&G 25 LM Low modulus so stays elastic after curing Resistant to UV, rain, snow, ozone and many chemicals Thick-bodied for ease of application Lifetime guarantee Applications of Soudal Stay Fresh Silicone Sealant Bathrooms and kitchens (baths, basins, showers, toilets, glazed tile surrounds) Sealing in areas prone to high humidity Sealing in refrigerators and container construction Sealing in air conditioning systems Top sealing in glazing Long-term mould protection and food contact Stay Fresh Sealant Compatibility All usual building substrates, such as ceramic tiles, enamel, stainless steel, acrylic, glass There is no adhesion on PE, PP, PTFE (Teflon) and bituminous substrates. Technical Information Soudal Stay Fresh Technical Information Measurement Value Basis Polysiloxane Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 9min Curing speed * (20°C / 65% R.H.) Ca. 2mm/24h Hardness 25 ± 5 Shore A Density Ca. 1,03g/ml (Clear, Ice White)Ca. 1,25g/ml (Ivory) Elastic recovery (ISO 7389) > 80% Maximum allowed distortion 25% Temperature resistance -60°C → 180°C Max. tension (DIN 53504) 1,40N/mm² Elasticity modulus 100% (DIN 53504) 0,39N/mm² Elongation at break (DIN 53504) 700% Application Temperature 5°C → 35°C Colours Clear, Ice White, Ivory (RAL1015) Volume 300ml Cartridge Type EU3 Application Standard skeleton gun Joint Dimensions Min. width for joints: 5mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Fix ALL Crystal Clear Sealant and Adhesive from Soudal (290ml EU3 cartridge) Invisible bonding and sealing! Fully transparent elastic adhesive sealant with the same strength properties as Fix ALL Flexi, so it is perfect for creating super strong and invisible bond, to all materials. Fix ALL Crystal is a completely neutral SMX Hybrid Polymer that is friendly to the environment and is used for interior and exterior bonding, filling and sealing. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Crystal clear appearance - fully transparent bond and seal Excellent adhesion - bonds to nearly all surfaces, even moist Anti-mould formula - impervious to mould Permanently elastic - remains flexible even after curing Can be overpainted - use water-based paints and some others Easy to use - primerless adhesion to nearly all surfaces Solvent-free and neutral - suitable for areas where food is processed High quality product - conforms to EN 15651-1 and EN 15651-3 The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Applications fo Fix ALL Crystal All common bonding and sealing Transparent and elastic bonding and sealing Invisible bonding of glass and other transparent materials in indoor applications Joints in bathrooms and kitchens Technical Information Fix ALL Crystal Sealant & Adhesive Compatibility All usual building substrates, glass, treated wood, PVC, plastics, metals stone and concrete There is no adhesion on PE, PP, PTFE and bituminous substrates. Porous surfaces in water loaded application should be primed and smooth surfaces treated with Surface Activator Not suitable for natural stone, expansion joints or as a glazing sealant Do not use in applications where continuous water immersion is possible or aquariums As with all sealants, compatibility tests are always recommended Soudal Fix ALL Crystal Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 10 min Curing speed * (20°C / 65% R.H.) Ca. 2 mm/24h → Ca. 3 mm/24h Hardness 38 ± 5 Shore A Density Ca. 1,04 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion ±20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 2,40 N/mm² Elasticity modulus 100% (DIN 53504) 0,80 N/mm² Elongation at break (DIN 53504) 300% Application Temperature 5°C → 35°C Volume 290ml Cartridge Type EU3 Application Standard skeleton gun Joint dimensions Min. width for bonding: 1mm Min. width for joints: 5mm Max. width for bonding: 3mm Max. width for joints: 10mm Min. depth for joints: 5mm * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Soudal Fix ALL Turbo Super-Fast Sealant & Adhesive (White, 290ml EU3 cartridge) Super-fast bonding - even on wet surfaces! Super-fast elastomeric adhesive, sealant and filler that provides a hand-tight bond in just 20 minutes. Use internally or externally and apply in all weather conditions, on most materials, including wet and damp surfaces. Fix ALL Turbo is a high quality single component solvent-free adhesive-sealant based on SMX-Polymer with very fast build-up of strength. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Super-fast bonding - fixed in 20 mins and full strength in 3 hours (adjustable for 5 mins) High strength adhesive - double strength of standard sealants High initial tack - reduces the need initial support Easy to use - apply with cartridge gun and tool finish All-weather use - can be applied in all conditions Permanently elastic - remains flexible after curing Good colour stability - weather and UV resistant Can be overpainted - overpaint with water-based paints Quality assured - conforms to EN 15651-1:2012: Type F -INT The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Technical Information Fix ALL Turbo Compatibility All usual building substrates, natural stone, treated wood, PVC, plastics Can not be used as a glazing sealant Not suitable for bonding aquariums Can bond natural stone but should not be used as a joint sealant on them Porous surfaces in water loaded applications should be primed All smooth surfaces can be treated with Surface Activator As with all sealants, compatibility tests are recommended Fix ALL Turbo Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 5 min Hardness 65 ± 5 Shore A Density Ca. 1,52 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion ± 20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 3,80 N/mm² Elasticity modulus 100% (DIN 53504) 3,00 N/mm² Elongation at break (DIN 53504) 200% Adjustable until Ca. 5 min Application Temperature 5°C → 35°C Colours White Volume 290ml Cartridge Type EU3 Application Standard skeleton gun * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Silirub LMN Silicone Sealant from Soudal (Choice of colour available) Thick-bodied for easier application! Superior quality low modulus neutral cure (LMN) silicone sealant for glazing and construction. Offers primerless adhesion to all common construction materials, with high movement capability to accommodate expansion and contraction. Silirub LMN from Soudal, is thick-bodied, provides excellent toolability with a very fast-skinning time and final cure. Being a 2-Butanone oxime, Silirub LMN offers excellent adhesion to PVC-u. 300ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Thick-bodied for easy to application Low modulus means it stays elastic after curing Neutral cure offers primerless adhesion to most surfaces Resistant to UV, rain, snow, ozone and many chemicals Conforms to ISO 11600 F&G 25 LM Virtually odourless and good temperature resistance EXTRA THICK AVAILABLE: Although our Silirub LMN is a thick-bodied glazing and construction sealant, we still offer a thickened version of the Brilliant White colour, which further speeds up the process of tooling for the most active fitters. Applications of Silirub LMN Silicone Sealant Glazing, construction and industrial sealing applications Perimeter sealing of window and door frames Sealing of roofline and drainage systems Weather sealing of aluminium glazing systems, curtain walling and façade panels General maintenance and sealing of expansion joints Roofing seals including lead, roofing slates, and fibre-cement Industrial applications using coated metals, anodized aluminium, stainless steel HVAC ducting, pipework and drainage joints Silirub LMN Sealant Compatibility Excellent adhesion to common construction materials (PVC-u, plastics, masonry, metal and wood) Not to be used on natural stone such as marble and granite (risk of staining) Can be used with most glass types, except self-cleaning, laminated and PVB. Should not come into contact with the butyl sealant on sealed double-glazed units What is Low Modulus and High Modulus? Modulus describes how a cured sealant acts under stress and strain. The term Low Modulus describes a sealant that is softer and stretchier than High Modulus, which are harder and less elastic. Low Modulus sealant has approximately 50% movement capability compared to 25% of High Modulus. Choice between Low Mod and High Mod depends on application, using around exterior PVC-u, such as windows, doors and roofline would require a Low Mod to accommodate expansion and contraction. Sealing around a worktop, or glass tank would require a High Mod sealant. Technical Information Silirub LMN Technical Information Measurement Value Basis Polysiloxane Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 5min Curing speed * (20°C / 65% R.H.) Ca. 2mm/24h Hardness 25 ± 5 Shore A Density Ca. 1,03g/ml (brilliant white)Ca. 1,25g/ml (colours) Elastic recovery (ISO 7389) > 80% Maximum allowed distortion 25% Temperature resistance -60°C → 150°C Max. tension (DIN 53504) 1,60N/mm² Elasticity modulus 100% (DIN 53504) 0,38N/mm² Elongation at break (DIN 53504) 800 % Application Temperature 5°C → 35°C Colours Black, Bronze, Brown, Caramel, Chartwell Green, Clear, Cream White (RAL9001), Grey, Anthracite Grey (RAL7016), Teak, White, Brilliant White, Brilliant White – Thickened Volume 300ml Cartridge Type EU3 Application Standard skeleton gun Joint Dimensions Min. width for joints: 5mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Soudal Fix ALL Flexi Sealant & Adhesive (Choice of colour available) Seal and bond in all circumstances! Fix ALL Flexi is a multi-purpose highly flexible sealant and high strength adhesive in one tube. Perfect for interior and exterior bonding, filling and sealing of porous, non-porous, wet and humid surfaces, even under water! Fix ALL Flexi is completely neutral SMX Hybrid Polymer with no solvents, halogens, acids, isocyanates, so friendly to the environment and the user. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Permanently flexible – absorbs high joint movement One tube does all – strong bonding and sealing, inside and out Immediately paintable - even water-based paints straight away Non-staining and neutral - bond and seal porous natural stone Easy to use – primerless adhesion to nearly all surfaces Solvent-free and neutral – suitable for areas where food is processed Anti-mould formula - contains ZnP (biocide with fungicidal action) Long lasting - colourfast and resistant to UV, rain, snow, ozone and many chemicals High quality product - conforms to ISO 11600 F&G 25 LM and ISO 16938-1 The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Applications of Fix ALL Flexi Sealing and filling in all weather conditions Paintable elstomeric sealing and bonding Bonding and sealing porous natural stone (such as marble and limestone) Sanitary sealing and bonding Sealing in food handling areas Sealing and bonding in building and construction Strong elastic bonding in vibrating constructions Sealing of floor joints Sealing and bonding in the building and construction industry Technical Information Fix ALL Flexi Sealant and Adhesive Compatibility All usual building substrates, natural stone, treated wood, PVC, plastics Tested on the following metal surfaces: steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403. Good adhesion on plastics, including polystyrene, polycarbonate, PVC, ABS, polyamide, PMMA, fiberglass reinforced epoxy, polyester. There is no adhesion on PE, PP, PTFE and bituminous substrates. A surface activator is recommended for optimal adhesion and porous surfaces in water loaded applications should be primed As with all sealants, compatibility tests are always recommended Soudal Fix All Flexi Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 10 min Curing speed * (20°C / 65% R.H.) Ca. 2 mm/24h → Ca. 3 mm/24h Hardness 40 ± 5 Shore A Density Ca. 1,67 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion ±20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 1,80 N/mm² Elasticity modulus 100% (DIN 53504) 0,75 N/mm² Elongation at break (DIN 53504) 750% Application Temperature 5°C → 35°C Colours White, Black, Grey, Brown Volume 290ml Cartridge Type EU3 Application Standard skeleton gun Joint dimensions Min. width for bonding: 2mm Min. width for joints: 5mm Max. width for bonding: 10mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Fix ALL High Tack Sealant & Adhesive from Soudal (Choice of colour available) Quick initial grab and rapid cure! Super strong quick-grab adhesive, sealant and filler with a high initial tack, which reduces the need for initial support whilst curing. Use internally or externally and apply in all weather conditions, on most construction materials, including wet and damp surfaces. Fix ALL Flexi is a high quality, single component neutral SMX Hybrid Polymer joint sealant, with no solvents, halogens, acids or isocyanates, so friendly to the environment and the user. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits High initial tack - reduces the need initial support Fast curing formula - quick to build end strength Super strong bond - very high mechanical properties Easy to use - apply with cartridge gun and tool finish All-weather use - can be applied in all conditions Mould resistant - XS1 fungicide Good colour stability - weather and UV resistant Can be overpainted - overpaint with water-based paints Quality assured - conforms to ISO 11600 F 20 HM The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Applications for Fix ALL High Tack Bonding where initial grab and final strength is important Bonding and sealing in any weather conditions Bonding and sealing on most surfaces Bonding of porous natural stone surfaces (marble and limestone) Elastic bonding of panels, profiles and common substrates Bathroom and kitchen sealing and bonding Elastic bonding in car and container industry Technical Information Fix ALL High Tack Compatibility All usual building substrates, natural stone, treated wood, PVC, plastics Can not be used as a glazing sealant Not suitable for bonding aquariums Can bond natural stone but should not be used as a joint sealant on them Porous surfaces in water loaded applications should be primed All smooth surfaces can be treated with Surface Activator As with all sealants, compatibility tests are recommended Fix ALL High Tack Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 5 min Curing speed * (20°C / 65% R.H.) Ca. 3 mm/24h Hardness 65 ± 5 Shore A Density Ca. 1,47 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion 20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 3,20 N/mm² Elasticity modulus 100% (DIN 53504) 2,30 N/mm² Elongation at break (DIN 53504) 400% Application Temperature 5°C → 35°C Colours White Volume 290ml Cartridge Type EU3 Application Standard skeleton gun Joint dimensions Min. width for bonding: 2mm Min. width for joints: 5mm Max. width for bonding: 10mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Soudal Trade Multi-Purpose Silicone Joint Sealant (Choice of colour available) Low-cost general silicone for the trade! Multi-purpose silicone joint sealant that forms a flexible and durable weathertight seal on many common building surfaces. Soudal Trade Multi-Purpose Silicone is an acetoxy silicone sealant with anti-mould fungicides and can be used on many surfaces, including glass, metals, wood, ceramic tiles and more. Features & Benefits Provides a durable weathertight seal Remains flexible after curing Use with glass, metals, wood and ceramic tile Contains fungicide to resist mould growth Permanent colour, UV resistant Acetoxy silicone sealant This is a handy low-cost silicone for general construction, masonry, woodworking, roofing, flooring, bathrooms, kitchens and more. Technical Information Soudal Multi-Purpose Silicone Technical Information MeasurementValue Basis Polysiloxane Consistency Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 7min Curing speed * (20°C / 65% R.H.) Ca. 2mm/24h Hardness 25 ± 5 Shore A Specific gravity (DIN 53479) Ca. 1,00g/ml Elastic recovery (ISO 7389) > 90% Maximum allowed distortion 25% Temperature resistance -60°C → 180°C Max. tension (DIN 53504) 1,50N/mm² Elasticity modulus 100% (DIN 53504) 0,40N/mm² Elongation at break (DIN 53504) 800% Application Temperature 5°C → 35°C Colours Brilliant White, Clear, Brown, Black, Grey Volume 270ml Cartridge Type EU3 cartridge with nozzle Application Standard skeleton gun Joint Dimensions Minimum width: 5mm Maximum width: 30mm Minimum depth: 5mm Recommendation: 2 x depth = width of joint * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.