SNAPA Polycarbonate H-Section (Clear)
Clear H-Section Joining Strip for Polycarbonate Sheets
(Choice of thickness and length)
Provides a strong rigid seal!
Clear uPVC plastic H-profile joining strip for 6mm, 10mm or 16mm multi-wall polycarbonate sheets along sidth or length. Provides increased coverage and greater compression for a more reliably sealed joint.
Available for 6mm, 10mm and 16mm thick multiwall polycarbonate sheets and in lengths of 2m (6ft 7in), 3m (9ft 10in) and 4m (13ft 1in). Useful as a muntin bar to increase length of sheet coverage or as a joining strip along the length to increase the width.
Features & Benefits
- Discreet transparent appearance
- Designed for tighter hold on sheets
- Use with 6/10/16mm polycarbonate
- Use as edge trim or end closure
- Strong and lightweight
- Simple push-fit design
A great ancillary product to the SNAPA Snap-Fix Glazing Bar system, which is a highly effective and low-cost lean-to roof capping solution for timber rafters. Common uses for SNAPA include: Carports, Greenhouses, Canopies, Covered Walkways and Pergolas.
Technical Information
Materials | PVC-u |
Compatibility | 6mm, 10mm or 16mm thick sheets |
Fitting the H-Section Trim
To fit, simply push the h-section onto first one sheet and then push the second sheet into the open side. Ensure that there is a little breathing space between the end of the sheet and the internal face of the h-section. It is often recommended to run a bead of neutral cure silicone on the underside of the top lips, to help seal and secure.
0 of 0 reviews
Login
Accessory Items
Accessory Items