Pencil Round Architrave (2.5m)

£10.93*

Colour
Width
Product number: EUR-2078-1013
Product information "Pencil Round Architrave (2.5m)"

Architrave Finishing Trim for uPVC Windows & Doors

(Choice of width and colour)

Multi-purpose architrave with many uses!

Versatile pencil-round architrave window and door finishing trim. Durable 6mm thick flat moulding fits easily to frame or wall reveal to conceal unsightly joints. Available in a range of width and colour to suit existing profiles.

Features a square back edge and an attractive rounded front edge that creates a neat professional finish on frame or reveal.

Features & Benefits

  • Attractive finish - front edge rounds neatly onto frame or reveal
  • Quick and easy fitting - cut with gasket shears or saw, and then stick
  • Not just internal corners - square rear edge allows use as traditional architrave
  • Wide colour choice - available in popular window and door profile colours
  • Reduces maintenance - removes need for painting and easy to clean

Plastic uPVC Pencil-Round Architrave Window Door Bead Trim

DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims.


Technical Information

MeasurementValue
Material uPVC plastic (some colours laminated)
Width 45mm, 65mm and 95mm
Thckness 6mm
Length 2.5m (8ft 2in), or 5m (16ft 5in)
Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ
Profile Rounded front edge and square rear edge.
Accreditations BSI Approved
Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated)

Fitting of Pencil-Round Architrave

Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful:

  • If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting.
  • For cutting, we recommend the use of gasket shears, or junior hacksaw.
  • Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape.
  • Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use.
  • Future cleaning should require no more than a wipe with warm soapy water.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Accessory Items

Cloaking Fillet Architrave (2.5m)
Plastic Cloaking Fillet for uPVC Windows & Doors (Choice of width and colour) Provides a neater and tighter fit! Durable and easy-to-fit, 6mm thick cloaking fillet with rounded front edge and chamfered rear edge. Provides a neat internal or external finish around uPVC windows, doors and more. Available in a wide range of colours at 20mm, and the more popular 30mm widths. Cloaking Fillets are similar to 6mm pencil round architrave trims, but are narrower (20mm or 300mm wide) and feature a chamfered rear edge. It is the chamfered rear edge that makes them more suitable for covering silicone beads and internal corners, whilst ensuring a neat professional finish. Features & Benefits Attractive finish - front edge rounds neatly onto frame Easier and cleaner fit - chamfered rear edge means tighter fitting to wall Quick and easy fitting - cut with gasket shears or saw, and then stick Highly versatile - perfect trim for windows, doors, laminate floors, and more Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm or 30mm Thckness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rounded front edge and chamfered rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic Cloaking Fillet Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £2.14*
£4.81*
uPVC Finishing Trim Sample Pack
Samples of Window and Door Finishing Trims (Includes 10 profiles, and 11 finishes) See the shapes, finishes and colours! Sample pack of uPVC exterior grade window and door finishing trims. Perfect for checking style, size and colour, prior to purchase of longer lengths. Samples of quadrant beads, square trim, D-mould, chamfered bead, cloaking fillet, and pencil round architrave, are supplied in lengths of 150mm (6"), with all 11 colours represented across the samples. Features & Benefits Adds interesting detail - trim with attractive profiles Covers and conceals - creates a neater window and door finish Quick and easy fitting - simply cut to length and stick Highly versatile - ideal for windows, doors, laminate floors, and more Reduces maintenance - No need to paint and easy to clean Did you know? This wall flashing has an expected life expectancy of over 20years! Did you know? All trims are available at 2.5m (8ft 2in) in length, with D-mould, Cloaking Fillet, and Pencil Round Architrave, also available at 5m (16ft 5in). Sample Pack Contents Quadrant BeadRounded convex shape, which softens the appearance of internal corners, and a chamfered inside edge that means it can fit tighter into corners with existing silicone or caulk. Both 13mm and 17.5mm radius supplied.Chamfered BeadPrimarily used for internal corners. Features an adhesive channel along the underside, which provides a good contact area for stronger grip, whilst still allowing the bead to sit flat.Square TrimPrimarily used for internal corners. Features a chamfered edge, which allows a bead of fixing adhesive to be applied away from visible edges, for a neater finish.D-mouldRounded along both edges, d-mould is perfect for concealing butted joints, such as between frames, and can be fitted quickly and easily to give a neat professional finish.Cloaking FilletRounded front edge and chamfered rear, which makes it them more suitable for covering silicone beads and internal corners. Supplied in 20mm and 30mm width.Pencil Round ArchitraveSquare back edge, with an attractive rounded front edge, that creates a neat professional finish on frame or window reveal. Supplied in widths of 45mm, 65mm, and 95mm. Technical Information Materials uPVC plastic (some colours laminated) Sample Sizes Various profile sizes supplied, all with length of 150mm Sample Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting uPVC Finishing Trims Fitting the plastic window and door trims is quick and easy. Just trim to size, stick with superglue, a contact adhesive, or double-sided take. More details are provided on main finishing trim listings.

£3.89*
Laminated Window Board End Cap
End Trim for uPVC Laminated Window Board (Available in a choice of colours) Finish off your window cill with a stylish end cap! Double-ended capping for 23mm thick window board. 400mm long so can be cut to size and provide a neat protective finish for both ends of a windowboard. Available in a choice of colours and a foiled finish to perfectly match your window board, these maintenance-free end caps are easy to install, are heat and moisture resistant and made to the highest British standard quality. Features & Benefits UPVC - excellent protection from moisture, scratches and stains Foiled finish - your end cap will perfectly match your window board Maintenance-free - the occasional wipe keeps it looking new Installation - with no mechanical fixings only superglue is required British standard quality - backed by a 20 year guarantee Technical Information Product DetailValue Size Width: 25mm (0.98") Height: 4mm (0.15") Length: 400m (15.74") Material UPVC Finish & Colour Availble in White and Foiled Finish in Rosewood, Golden Oak and Light Oak Fitting and Usage If necessary, cut the caps to the correct size. Apply superglue and place firmly on the end of your board Top Tip: When gluing, we recommend using an activator for a quick dry solution.

Variants from £0.84*
£4.38*
25mm D-Mould Architrave (2.5m)
25mm D-Mould Architrave Window Trim Finishing Strip (Available in choice of colours) Looks great from both sides of joint! Tough 25mm wide plastic d-section, rounded along both edges, d-mould is perfect for concealing butted joints on uPVC windows frames and when both edges will be visible. Available in a wide range of colours to match existing frames. D-moulding is commonly used to conceal joints between frames and can be fitted quickly an easily to give a neat professional finish. Features & Benefits Twin-edged profile - both edges round neatly onto surface frame Quick and easy fitting - cut with gasket shears or saw, and then stick Wide colour choice - available in popular window and door profile colours Fitters favourite - one product can be used for many purposes Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 25mm (1in) Thickness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile D-section, rounded along both edges Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic D-Mould Fitting the d-moulding window finishing trim is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £1.90*
£4.54*

Accessory Items

Xpert Professional SK5 Mitre Shear
Solid SK5 Blade Mitre Shears (Supplied with blade and choice of spare) Hard-wearing solid blade for professional use! Professional solid blade gasket and trim shear for sharp, clean cuts at precise angles on materials including plastic, gasket and strip wood. Designed with a broad anvil base plate to cut against, the mitre shear simplifies the cutting of flexible materials (such as window and door seals, decorative trims, sealing strips and battens) which is why it is becoming an invaluable tool for the uPVC window, conservatory and roofline industry. Features & Benefits Base plate angle markings (45-90°) for accurate cutting Hardwearing SK5 blade can be sharpened or replaced Solid durable construction with safety lock Base plate supports flexible material during cutting Cushion grip handles for extra comfort and safety Did you know? Although SK5 blade is made from hard, long wearing chrome vanadium steel, as all blades it can become blunt. These blades can be sharpened if necessary and new replacement blades (GKT03105) and base plates (GKT03106) are available. Technical Information Technical Information MeasurementValue Base Plate Angle Markings 45° to 90° Blade Type SK5 solid shear blade Material Steel and Chrome Vanadium Steel Size (l x w h) 220mm x 75mm x 70mm Application Cutting of plastic, rubber, leather and strip wood. Maximum Material Height 15mm Maximum Cut Length 50mm Maximum Material Width 50mm (90° cut), 35mm (45° cut) Fitting and Usage Using the Mitre Shear The mitre shear is fitted with a flip latch that locks the jaws closed when not in use for safety and to protect the blade. To use, just release the jaws by flipping the safety latch and place the item to be cut on the base plate. Just squeeze the handles to cut. Remember to use the angles marked into the base plate for quick and accurate cuts from 45° to 90°. Avoid overloading the cutters to maximise life of the product.

£13.09*
Super Glue Mitre Kit Adhesive
Mitre Kit Superglue and Activator Super Fast Bonding of uPVC Trims and More 50g Superglue + 200ml Activator Spray Thicker, less-runny formula! Two part, fast-acting, high strength bonding of uPVC window and door trims. Comprises a cyanoacrylate high viscosity adhesive with an aerosol activator to ensure full and rapid curing. Super glue is an ideal adhesive for many uses include modelling, jewelry making and repairs to toys, household appliances, car aprts and more. Super glue can be used to bond: plastic, PVC and polycarbonate woods, MDF, chipboard and cork metal, ceramics and rubber leather and fabric paper and cardboard The non-staining activator spray can be used with Super Glue to give instant cure and bonding in seconds. Features & Benefits Fast-acting - bonds in seconds Many uses - bonds many materials Easier to apply - high viscocity, so not as runny as other superglues Technical Information MeasurementValue Pack Contents Superglue (50g)Activator Spray (200ml) Viscosity High Superglue Cure Time Seconds (with Activator Spray)< 1 minute (without Activator Spray) Mitre Kit Application Super Glue is a really effective product when used on it's own but when combined with Super Glue Activator it becomes even more incredible, providing almost instant bonding. Clean surfaces to be bonded. Spray activatory onto one of the surfaces and allow to evaporate. Apply a small amount of super glue to the other surface and assemble.* *As with all fixatives, care should be taken during use and the product should be stored in a safe place out of the reach of children. Refer to product for recommendations.

From £3.28*
Soudal Fix ALL Flexi Sealant & Adhesive
Soudal Fix ALL Flexi Sealant & Adhesive (Choice of colour available) Seal and bond in all circumstances! Fix ALL Flexi is a multi-purpose highly flexible sealant and high strength adhesive in one tube. Perfect for interior and exterior bonding, filling and sealing of porous, non-porous, wet and humid surfaces, even under water! Fix ALL Flexi is completely neutral SMX Hybrid Polymer with no solvents, halogens, acids, isocyanates, so friendly to the environment and the user. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Permanently flexible – absorbs high joint movement One tube does all – strong bonding and sealing, inside and out Immediately paintable - even water-based paints straight away Non-staining and neutral - bond and seal porous natural stone Easy to use – primerless adhesion to nearly all surfaces Solvent-free and neutral – suitable for areas where food is processed Anti-mould formula - contains ZnP (biocide with fungicidal action) Long lasting - colourfast and resistant to UV, rain, snow, ozone and many chemicals High quality product - conforms to ISO 11600 F&G 25 LM and ISO 16938-1 The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Applications of Fix ALL Flexi Sealing and filling in all weather conditions Paintable elstomeric sealing and bonding Bonding and sealing porous natural stone (such as marble and limestone) Sanitary sealing and bonding Sealing in food handling areas Sealing and bonding in building and construction Strong elastic bonding in vibrating constructions Sealing of floor joints Sealing and bonding in the building and construction industry Technical Information Fix ALL Flexi Sealant and Adhesive Compatibility All usual building substrates, natural stone, treated wood, PVC, plastics Tested on the following metal surfaces: steel, AlMgSi1, brass, electrolytic galvanised steel, AlCuMg1, flame galvanised steel, AlMg3 and steel ST1403. Good adhesion on plastics, including polystyrene, polycarbonate, PVC, ABS, polyamide, PMMA, fiberglass reinforced epoxy, polyester. There is no adhesion on PE, PP, PTFE and bituminous substrates. A surface activator is recommended for optimal adhesion and porous surfaces in water loaded applications should be primed As with all sealants, compatibility tests are always recommended Soudal Fix All Flexi Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 10 min Curing speed * (20°C / 65% R.H.) Ca. 2 mm/24h → Ca. 3 mm/24h Hardness 40 ± 5 Shore A Density Ca. 1,67 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion ±20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 1,80 N/mm² Elasticity modulus 100% (DIN 53504) 0,75 N/mm² Elongation at break (DIN 53504) 750% Application Temperature 5°C → 35°C Colours White, Black, Grey, Brown Volume 290ml Cartridge Type EU3 Application Standard skeleton gun Joint dimensions Min. width for bonding: 2mm Min. width for joints: 5mm Max. width for bonding: 10mm Max. width for joints: 30mm Min. depth for joints: 5mm Recommendation sealing jobs: joint width = 2 x joint depth. * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Variants from £4.61*
£5.16*