Plastic Cloaking Fillet for uPVC Windows & Doors (Choice of width and colour) Provides a neater and tighter fit! Durable and easy-to-fit, 6mm thick cloaking fillet with rounded front edge and chamfered rear edge. Provides a neat internal or external finish around uPVC windows, doors and more. Available in a wide range of colours at 20mm, and the more popular 30mm widths. Cloaking Fillets are similar to 6mm pencil round architrave trims, but are narrower (20mm or 300mm wide) and feature a chamfered rear edge. It is the chamfered rear edge that makes them more suitable for covering silicone beads and internal corners, whilst ensuring a neat professional finish. Features & Benefits Attractive finish - front edge rounds neatly onto frame Easier and cleaner fit - chamfered rear edge means tighter fitting to wall Quick and easy fitting - cut with gasket shears or saw, and then stick Highly versatile - perfect trim for windows, doors, laminate floors, and more Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm or 30mm Thckness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rounded front edge and chamfered rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic Cloaking Fillet Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

25mm D-Mould Architrave Window Trim Finishing Strip (Available in choice of colours) Looks great from both sides of joint! Tough 25mm wide plastic d-section, rounded along both edges, d-mould is perfect for concealing butted joints on uPVC windows frames and when both edges will be visible. Available in a wide range of colours to match existing frames. D-moulding is commonly used to conceal joints between frames and can be fitted quickly an easily to give a neat professional finish. Features & Benefits Twin-edged profile - both edges round neatly onto surface frame Quick and easy fitting - cut with gasket shears or saw, and then stick Wide colour choice - available in popular window and door profile colours Fitters favourite - one product can be used for many purposes Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 25mm (1in) Thickness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile D-section, rounded along both edges Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic D-Mould Fitting the d-moulding window finishing trim is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

20mm Square Bead Finishing Trim (2.5m long, in choice of colour) Add detail whilst concealing unsightly corners! Square section uPVC foam bead adds attractive detail to internal corners when used as a window finishing trim. Durable, maintenance-free and available with tough laminated foil to match popular window profile colours. Features a small chamfered edge, which allows a bead of fixing adhesive to be applied away from visible edges, for a neater finish. This 20mm square trim is primarily used as an internal corner trim to finish the installation of uPVC windows, but can be used for countless other purposes around the home. Features & Benefits Add detail and interest - attractive square profile trim Neater fit - chamfered corner for flatter cleaner fixing Quick and easy fitting - simply cut to length and stick Highly versatile - ideal for windows, doors, laminate floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm Height 20mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile 20mm square section with small chamfer to one corner. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of uPVC 20mm Square Bead Fitting the plastic square section window finishing trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting of plastic trims, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. The chamfered corner can be used to apply a bead of adhesive along the length. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Architrave Finishing Trim for uPVC Windows & Doors (Choice of width and colour) Multi-purpose architrave with many uses! Versatile pencil-round architrave window and door finishing trim. Durable 6mm thick flat moulding fits easily to frame or wall reveal to conceal unsightly joints. Available in a range of width and colour to suit existing profiles. Features a square back edge and an attractive rounded front edge that creates a neat professional finish on frame or reveal. Features & Benefits Attractive finish - front edge rounds neatly onto frame or reveal Quick and easy fitting - cut with gasket shears or saw, and then stick Not just internal corners - square rear edge allows use as traditional architrave Wide colour choice - available in popular window and door profile colours Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 45mm, 65mm and 95mm Thckness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rounded front edge and square rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of Pencil-Round Architrave Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Quadrant Bead Convex Finishing Trim (Choice of width and colour) Creates a neater and softer appearance! Multi-purpose uPVC foam quadrant beads with a tough laminated foil that matches popular window profile. Covers unsightly internal corners and creates a neat professional finish around windows, laminate flooring and more. Available in choice of width and colour. These tough and durable plastic trims have a rounded convex shape, which softens the appearance of internal corners, and a chamfered inside edge that means it can fit tighter into corners with existing silicone or caulk. Features & Benefits Softens appearance - attractive rounded profile Fits neater - chamfered rear edge for tighter fit Quick and easy fitting - cut with gasket shears or saw, and then stick Highly versatile - ideal for windows, doors, laminate floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width (Radius) 13mm or 17.5mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Quadrant convex front edge and chamfered rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of uPVC Quadrant Bead Fitting the plastic quad trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

20mm x 15mm Chamfered Bead Finishing Trim (Available in choice of colours) Modern decorative finish for internal corners! Plastic PVCu bead with chamfered face for adding a durable and attractive linear finish around windows, flooring and more. Available with tough laminated foil to match popular window profile colours. Features an adhesive channel along the underside, which provides a good contact area for stronger grip, whilst still allowing the bead to sit flat. Adhesive is kept away from visible edges, so gives a neater finish. This 20mm x 15mm extrusion primarily used as a bead for internal corners around uPVC windows and doors, but can be used for multiple other purposes around the home. Features & Benefits Modern appearance - chamfered for a fresh look Cleaner fixing - adhesive channel on underside Quick and easy fitting - simply cut to length and stick Highly versatile - ideal for windows, doors, floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm Height 15mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rectangular with triangle section cut from one corner. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of 20mm x 15mm Chamfered Bead Fitting the plastic chamfered window finishing trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting of plastic trims, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. The cutout channel on the underside can be used to apply a bead of adhesive along the length. Future cleaning should require no more than a wipe with warm soapy water.