EasyRidge F Dry Fix Hip Accessory Kit

£12.00*

% £21.00* (42.86% saved)

Prices incl. VAT plus shipping costs

No longer available

Product number: EAS-1703-1001

Product information "EasyRidge F Dry Fix Hip Accessory Kit"

Transform ridge kit into hip kit

Hip trays fitted to hip

Trays, hip clips and ratchet clips

Hip Accessories for EasyRidge Ridge Kit

Includes trays, hip clips and ratchet clips

Improve the look and performance of your hip

Used with the EasyRidge Ridge Kit. Supports hip tile to give a neat, continuous line on the roof and includes a selection of clips for securing small tile cuts along the hip.

Hip trays are unobtrusive and will not detract from the overall look of the roof.

Features & Benefits

Easy to fit - no special tools required
Water resistant - another barrier against water ingress
Strong and UV stable - lasts long and doesn't break down
Attractive - hip tiles look neat and straight
Secures roof and hip tile - supplied with aluminium tile and plastic ratchet clips

The Hip Accessory Kit is supplied with 26 x Short Leg Ratchet Clips, which can be used as an alternative to the long leg clips supplied with the Ridge Kit itself. These shorter clips can be used when fitting with tile that sit low on the hip, such as Third Round or Marley Modern. They ensure that the clip does not foul against the tile and engages fully.

For your convenience, we also supply lonng and short Hip Clips that can secure small tile cuts along the hip.

1.2m Hip Trays (x 5)
Short Leg Ratchet Clips (x 26)
Long Hip Clips (x 20)
Short Hip Clips (x 20)

Fitting the EasyRidge Dry Fix Ridge Kit to a hip is made easy with the Hip Accessory Kit. The following pointers illustrates just how easy.

Build-up hip to a height that allows the centre of tray to rest on hip batten and the tiles on either side. Elevated hip batten may be secured with mechanical fixings and/or batten straps.
Ensure small tile cuts, that cannot be mechanically fixed at the hip in the normal way, are secured using the short or long hip clips supplies.
Once built-up hip is complete and small tile custs are secured, ensure tiles are dry and free from dust or other surface contamination.
Lay the ridge roll centrally along the hip batten and secure with staple or suitable nails.
Remove protective backing from the Butyl strips and dress over the tile to produce a continuous surface contact.
The Hip Trays are then fitted to support the hip tiles, keeping them straight and level when screw-fixing to the hip.
Trays should be secured with a single corrosion resistant clout nail and overlapped by 50mm along the hip when necessary. Trays can be cut as required at the eaves and mitred at the ridge.
Once the hip support trays are in place, hip tiles can be fitted in the same manner as Ridge Tiles.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Accessory Items

Tip

6m EasyRidge F PLUS Dry Fix Ridge Kit

Ridge F PLUS 'Dry Fix' Ridge/Hip Kit (6m) (Available in Black or Terracotta) NEW Ridge F PLUS is more streamlined and more secure! Dry Fix F Plus forms a ridge that is resistant to water, whilst allowing the roof to breath. Offers quick and simple mechanical fixing of almost all ridge tiles, and guaranteed for 20 years. The ventilated Ridge Roll provides the equivalent of 5mm continuous airflow and it's malleable, crimped aluminium skirt with flexible ridge tile Unions are the key components that make this kit so effective. Together, they offer long term security with a quality water seal. Suitable for concrete, clay ridge tiles, and compatible with slate and tile profiles. Features & Benefits Quick and easy to fit - no special tools or skills required Allows the roof to breath - provides a ventilated ridge Fully serviceable - easy to maintain even after many years Glass filled nylons - increased strength, resistance and stability Discreet design - provides a more streamlined appearance Can also be used on hips - requires dedicated Hip Trays Long-life durable fixings - Stainless Steel and Nylon 20 year guarantee - British Standard product you can trust The Easy Ridge F complies with BS 5250 and BS 5534 and is manufactured to DIN 4108/3. The dry fix system is resistant to freeze/thaw cycles plus thermal expansion/contraction and is recommended by NHBC. CAN BE USED ON HIPS! Ridge F Plus is great on hips too! Just requires a dedicated Hip Try to be fitted over the ventilated roll (see our Hip Accessory Kits). 6m Ventilated Ridge Roll Polypropylene mesh fabric with spine and malleable crimped aluminium skirt, which makes it easy to dress over contoured tiles. Underside of skirt has high butyl adhesive strips for sealing against roof tile. Material Polypropylene and Aluminium Length 6,000mm Width 300mm Colour finge and clips Black or Terracotta Ridge Unions (13 Pack) Tough and flexible Nylon unions that you can use with almost all ridge tile, including angled and half round profiles of concrete or clay. Adjoining ridge tile sit on either side of a union up-stand and are trapped securely with 3 'ratchet' clips , the central one featuring a screw port to fasten to ridge batten with provided stainless steel screw. Enough unions are supplied for standard length ridge tiles over 6m. Additional unions may be required if ridge tiles are shorter than 400mm. Material Nylon (union), Glass filled nylon (ratchet clips), Stainless Steel (screw fixings) Length 304.8mm Width 50mm Height 20mm Colour Black Each of the 13 x Unions is supplied with 1 x Large Ratchet Clip, 2 x Small Ratchet Clips and 1 x Stainless Steel screw.* Measurements taken when union flat. Ridge Batten Straps (10 Pack) Stainless steel straps, designed to be folded over ridge fixing battens and nailed to roof truss rafters through pre-drilled holes. Supplied with approximately 45 x nails. Material Stainless Steel (brackets), Stainless Steel (clout nails) Strap Length 400mm Strap Width 25mm Supplied with a quantity of Stainless Steel cloat nails. The kit is supplied with fitting instruction to help you through the process but be assured, fitting is quick and easy compared to mortar fitting and other dry-fix systems. Install roof underlay and battens as normal but finish underlay 5-30mm short of apex on either side and don't fit last batten Build up the ridge batten to required height (two battens are usually sufficient), and using stainless steel batten straps. Fix top tiling batten with minimum 10mm air gap between it and ridge batten, then lay and fix the tiles as normal Unroll EasyRidge F PLUS over the ridge batten, ensuring coverage over top course of tile and secure with corrosion resistant staples or nails Remove release paper from the butyl adhesive strips and dress neatly onto the dry/clean tiled surface Prepare the Unions by lightly pressing one large fixing clip (in the central slot) and 2 smaller ratchet clips Place end ridge tile and insert the prepared ridge union under and between the ridge tiles. Loosely tighten the 3 ratchet clips down onto the union. Secure to ridge fixing batten with Stainless Steel screw through central fixing clip Pushing the ratchet clips into the union to secure. Continue process along the ridge

£39.00*

Details

10m EasyRidge F PLUS Dry Fix Ridge Kit

Ridge F PLUS 'Dry Fix' Ridge/Hip Kit (10m) (Available in Black or Terracotta) NEW Ridge F PLUS is more streamlined and more secure! Dry Fix F Plus forms a ridge that is resistant to water, whilst allowing the roof to breath. Offers quick and simple mechanical fixing of almost all ridge tiles, and guaranteed for 20 years. The ventilated Ridge Roll provides the equivalent of 5mm continuous airflow and it's malleable, crimped aluminium skirt with flexible ridge tile Unions are the key components that make this kit so effective. Together, they offer long term security with a quality water seal. Suitable for concrete, clay ridge tiles, and compatible with slate and tile profiles. Features & Benefits Quick and easy to fit - no special tools or skills required Allows the roof to breath - provides a ventilated ridge Fully serviceable - easy to maintain even after many years Glass filled nylons - increased strength, resistance and stability Discreet design - provides a more streamlined appearance Can also be used on hips - requires dedicated Hip Trays Long-life durable fixings - Stainless Steel and Nylon 20 year guarantee - British Standard product you can trust The Easy Ridge F complies with BS 5250 and BS 5534 and is manufactured to DIN 4108/3. The dry fix system is resistant to freeze/thaw cycles plus thermal expansion/contraction and is recommended by NHBC. CAN BE USED ON HIPS! Ridge F Plus is great on hips too! Just requires a dedicated Hip Try to be fitted over the ventilated roll (see our Hip Accessory Kits). 10m Ventilated Ridge Roll Polypropylene mesh fabric with spine and malleable crimped aluminium skirt, which makes it easy to dress over contoured tiles. Underside of skirt has high butyl adhesive strips for sealing against roof tile. Material Polypropylene and Aluminium Length 10,000mm Width 300mm Colour finge and clips Black or Terracotta Ridge Unions (22 Pack) Tough and flexible Nylon unions that you can use with almost all ridge tile, including angled and half round profiles of concrete or clay. Adjoining ridge tile sit on either side of a union up-stand and are trapped securely with 3 'ratchet' clips , the central one featuring a screw port to fasten to ridge batten with provided stainless steel screw. Enough unions are supplied for standard length ridge tiles over 10m. Additional unions may be required if ridge tiles are shorter than 400mm. Material Nylon (union), Glass filled nylon (ratchet clips), Stainless Steel (screw fixings) Length 304.8mm Width 50mm Height 20mm Colour Black Each of the 22 x Unions is supplied with 1 x Large Ratchet Clip, 2 x Small Ratchet Clips and 1 x Stainless Steel screw.* Measurements taken when union flat. Ridge Batten Straps (17 Pack) Stainless steel straps, designed to be folded over ridge fixing battens and nailed to roof truss rafters through pre-drilled holes. Supplied with approximately 80 x nails. Material Stainless Steel (brackets), Stainless Steel (clout nails) Strap Length 400mm Strap Width 25mm Supplied with a quantity of Stainless Steel cloat nails. The kit is supplied with fitting instruction to help you through the process but be assured, fitting is quick and easy compared to mortar fitting and other dry-fix systems. Install roof underlay and battens as normal but finish underlay 5-30mm short of apex on either side and don't fit last batten Build up the ridge batten to required height (two battens are usually sufficient), and using stainless steel batten straps. Fix top tiling batten with minimum 10mm air gap between it and ridge batten, then lay and fix the tiles as normal Unroll EasyRidge F PLUS over the ridge batten, ensuring coverage over top course of tile and secure with corrosion resistant staples or nails Remove release paper from the butyl adhesive strips and dress neatly onto the dry/clean tiled surface Prepare the Unions by lightly pressing one large fixing clip (in the central slot) and 2 smaller ratchet clips Place end ridge tile and insert the prepared ridge union under and between the ridge tiles. Loosely tighten the 3 ratchet clips down onto the union. Secure to ridge fixing batten with Stainless Steel screw through central fixing clip Pushing the ratchet clips into the union to secure. Continue process along the ridge

£63.36*

Details

3m EasyRidge F PLUS Dry Fix Ridge Kit

Ridge F PLUS 'Dry Fix' Ridge/Hip Kit (3m) (Available in Black or Terracotta) NEW Ridge F PLUS is more streamlined and more secure! Dry Fix F Plus forms a ridge that is resistant to water, whilst allowing the roof to breath. Offers quick and simple mechanical fixing of almost all ridge tiles, and guaranteed for 20 years. The ventilated Ridge Roll provides the equivalent of 5mm continuous airflow and it's malleable, crimped aluminium skirt with flexible ridge tile Unions are the key components that make this kit so effective. Together, they offer long term security with a quality water seal. Suitable for concrete, clay ridge tiles, and compatible with slate and tile profiles. Features & Benefits Quick and easy to fit - no special tools or skills required Allows the roof to breath - provides a ventilated ridge Fully serviceable - easy to maintain even after many years Glass filled nylons - increased strength, resistance and stability Discreet design - provides a more streamlined appearance Can also be used on hips - requires dedicated Hip Trays Long-life durable fixings - Stainless Steel and Nylon 20 year guarantee - British Standard product you can trust The Easy Ridge F complies with BS 5250 and BS 5534 and is manufactured to DIN 4108/3. The dry fix system is resistant to freeze/thaw cycles plus thermal expansion/contraction and is recommended by NHBC. CAN BE USED ON HIPS! Ridge F Plus is great on hips too! Just requires a dedicated Hip Try to be fitted over the ventilated roll (see our Hip Accessory Kits). 3m Ventilated Ridge Roll Polypropylene mesh fabric with spine and malleable crimped aluminium skirt, which makes it easy to dress over contoured tiles. Underside of skirt has high butyl adhesive strips for sealing against roof tile. Material Polypropylene and Aluminium Length 3,000mm Width 300mm Colour finge and clips Black or Terracotta Ridge Unions (7 Pack) Tough and flexible Nylon unions that you can use with almost all ridge tile, including angled and half round profiles of concrete or clay. Adjoining ridge tile sit on either side of a union up-stand and are trapped securely with 3 'ratchet' clips , the central one featuring a screw port to fasten to ridge batten with provided stainless steel screw. Enough unions (7) are supplied for standard length ridge tiles over 3m. Additional unions may be required if ridge tiles are shorter than 400mm. Material Nylon (union), Glass filled nylon (ratchet clips), Stainless Steel (screw fixings) Length 304.8mm Width 50mm Height 20mm Colour Black Each of the 7 x Unions is supplied with 1 x Large Ratchet Clip, 2 x Small Ratchet Clips and 1 x Stainless Steel screw.* Measurements taken when union flat. Ridge Batten Straps (5 Pack) Stainless steel straps, designed to be folded over ridge fixing battens and nailed to roof truss rafters through pre-drilled holes. Supplied with approximately 25 nails. Material Stainless Steel (brackets), Stainless Steel (clout nails) Strap Length 400mm Strap Width 25mm Supplied with a quantity of Stainless Steel cloat nails. The kit is supplied with fitting instruction to help you through the process but be assured, fitting is quick and easy compared to mortar fitting and other dry-fix systems. Install roof underlay and battens as normal but finish underlay 5-30mm short of apex on either side and don't fit last batten Build up the ridge batten to required height (two battens are usually sufficient), and using stainless steel batten straps. Fix top tiling batten with minimum 10mm air gap between it and ridge batten, then lay and fix the tiles as normal Unroll EasyRidge F PLUS over the ridge batten, ensuring coverage over top course of tile and secure with corrosion resistant staples or nails Remove release paper from the butyl adhesive strips and dress neatly onto the dry/clean tiled surface Prepare the Unions by lightly pressing one large fixing clip (in the central slot) and 2 smaller ratchet clips Place end ridge tile and insert the prepared ridge union under and between the ridge tiles. Loosely tighten the 3 ratchet clips down onto the union. Secure to ridge fixing batten with Stainless Steel screw through central fixing clip Pushing the ratchet clips into the union to secure. Continue process along the ridge

£23.40*

Details