Instant Grab Adhesive Fast Bonding General Purpose Adhesive Beige, 285ml Alternative to mechanical fixings - no more nails! Fast bonding, non-slumping, multi-purpose adhesive for interior and exterior use on wood, masonry and metals. Saves Nails rubber-based adhesive is an alternative to mechanical fixings and is capable of filling gaps of up to 12mm. Used in a wide variety of domestic, commercial and industrial applications, including: wall fixings, fixing skirting board and architrave, window frames and sills, cladding, wall battens, brick, stone and concrete, ceramic, marble and brick veneer, timber, metal, some plastics and insulating PU foams Features & Benefits Interior and exterior use Instant grab Non-slumping Can paint over Saves Nails Use on many materials Toluene Free Bridges gaps up to 12mm Technical Information MeasurementValue Flammability Highly Flammable Boiling Point 65°C Full Cure Time 48 hours* Flashpoint -40°C Vapour Density 3 Vapour Pressure 140mm @ 20°C * Depending on bead thickness and temperature. Limitations Not suitable for areas subject to frequent water immersion. Not recommended for use on asphalt, bitumen or polystyrene. Not to be used as a mirror adhesive. Dusty or porous surfaces should be primed.

High strength polyurethane sealant and adhesive White, Black or Grey, 310ml Primer-less adhesion to most materials Versatile, high strength adhesive and sealant with good chemical and abrasion resistance. Ideal in expansion joints and can be overpainted with water-based and most solvent-based paints. Creates a very strong bond between a range of materials and due to it's elasticity properties, PU18 is particularly effective as an adhesive in applications where vibration is likely to occur (e.g. vehicles, boats and planes). It's tough, eleastic seal helps dampen vibration making it a favourite of the construction and transport industries. PU18 can be used with many materials including, Concrete, Polyester, Wood, Glass, Aluminium, Stone, Ceramics, Brick, GRP, Rubbers and PVC. Features & Benefits Oil resistant - excellent adhesion for oily areas like engines High strength - primerless adhesion to most surfaces Flexible joint - remains flexible between -30°C to +80°C Ideal for use in vibrating environments One-part moisture curing Technical Information MeasurementValue Form Thixotropic Paste Skinning Time @ 23°C, 50% RH 70 Minutes Thickness polymerised after 24 hours@ 23°C, 50% RH 3mm Application Temperature +5°C to +30°C Density Black: 1.16 - 1.18 On a polymerised joint Shore A Hardness 150 868 - 3 seconds ca 40 Elongation at break ISO 8339 ca 600% Modulas @ 100% ISO 8339 >0.60 N/mm Elastic Recovery ISO 7389 >80% Service Temperature Range -30°C to +80°C

General Purpose Builder Silicone (310ml EU3 cartridge in choice of colours) Low-modulus, neutral cure for perimeter sealing Professional grade, low modulus, neutral cure silicone had good adhesion properties and cures rapidly. RTV adhesive and sealant is unaffected by UV, ozone, salt water immersion and extreme temperatures. It contains no fungicides or oils that may allow water to leach and has good durability characteristics. Used in construction for perimeter external sealing of wood, aluminium and PVCu door and window frames and for weather sealing infil panels. WP70's additional PVCu adhesion promoters make this product an ideal choice for PVCu window and door fitters as well as the home DIY enthusiast. Features & Benefits Flexible and weathertight - provides great perimeter seal Non-fading - long-lasting colour Low odour - no unpleasant smells Low modulus - better elasticity, so allows more movement Neutral cure silicone - better adhesive properties PVCu - ideal for PVCu windows, doors and roofline Certified Low Meko Conforms to ISO 11600-F&G-25LM - certified for construction and glazing Technical Information MeasurementValue Tooling Time* 5-10 mins Tack Free Time* Less an 30 mins Cure Time* Approx 1mm per day Application Temperature +5C to +45C Service Temperature -60C to +160C Movement Accomodation 12.5% Adhesion Good to glass, aluminium, painted surfaces and most common building materials UV Resistance Excellent Ozone Resistance Excellent Shore A Hardness Approx 20-28 * Dependant on temperature and humidity. Limitations WP70 is not suitable for use with aquaria, for aquariums and fishtanks we recommend HA6 Marine Silicone. WP70 is not suitable for use on bitumen, asphalt, natural stone or self-cleaning glass and over-painting is not recommended. For these applications you may be interested in GB Pro, our MS Polymer adhesive and sealant.

Silicone Cartridge Skeleton Gun 310ml EU3 cartridges Use with Silicone Sealant, Mastic, Caulk and Adhesive cartridges! These skeleton guns can be used with standard 310ml cartridges. They are lightweight and made from strong steel, so comfortable for long periods of use and can take a bit of punishment. Much thought has gone into the design of this 12" Post Port Letterbox, from it's telescopic sleeve, which provides a perfect fit, to it's flap that can open up to 180° for easier posting. Features & Benefits Skeleton Gun> - Fits standard 310ml & 400 ml EU3 cartridges Strong and lightweight - steel frame and trigger Quality Design -comfortable ergonomic sprung trigger Sprung Thumb Plate - lock/unlocks plunger and releases pressure

Super Strong All-in-One Adhesive Sealant White, Black or Crystal Clear, 310ml Probably THE only tube you'll ever need! GB PRO Advanced Polymer is the professionals favourite, it's a versatile, maximum strength adhesive and sealant. Suitable for almost every sealing and bonding application. One part, high quality, high modulus sealing and bonding material based on advanced hybrid polymer technology. Totally neutral hybrid sealant for use in areas requiring a tough elastic rubber joint or as an adhesive with superior bonding strength. GB Pro Advanced Polymer Applications Filling and sealing joints, cracks and holes Bonding wood and wooden joints on ship decks High quality glazing sealant (incl. burglar safe glazing) Safe for self-cleaning glass Universal waterproof construction adhesive Bonding concrete, gypsum board and wood Bonding PVC, plastics, polystyrene and ceramics Bonding glass, polycarbonates and mirrors (with an acetone resistant backing) Bonding metals (copper, lead, zinc, aluminium, stainless steel) Ideal for showers, baths, spouting and guttering Features & Benefits All-in-One product (sealant, adhesive and caulk) Instant repair and sealing Seals and bonds wet surfaces Can be over-painted Can use under water and apply in all weather conditions Water resistant (including sea water), mould and chlorine. High modulus - flexible and non-shrinking Odourless and non-staining Resistant to UV radiation Will not discolour surfaces Technical Information MeasurementValue Density Clear - 1.5 g/ml, Colours - 1.43 g/ml Curing in 24 hours 2.5mm Shrinkage Nil Skinning Time Clear - approx 5-10 minutes, Colours - approx 10 minutes MMA (ISO9040) 20% Elongation at break (DIN 53504) 250% Hardness Shore A (DIN 53505) Clear - 60+/-4, Colours - 45 Temperature Resistance Clear: -30°C to +95°C, Colours: -40°C to +80°C Application Temperature +5°C to +40°C Storage Temperature +5°C to +30°C Conforms to ISO11600-F&G- 20HM. Limitations GB Pro is not recommended for use with expansion joints or for installations where the joints are continually immersed in water. Therefore GB Pro is not for use in aquariums, for aquariums and fishtanks we recommend HA6 Marine Silicone. GB Pro may yellow if allowed to cure in dark conditions or poor light.