35mm Heatguard/Opal Polycarbonate Sheets

Product information "35mm Heatguard/Opal Polycarbonate Sheets"

35mm Heatguard (Grey) Outside / Opal Inside Dual-tinted Polycarbonate

Any size up to 2.1m x 6m (width x length)

Lightweight, tough and thermally efficient roofing panels!

Dual-tinted polycarbonate with Heatguard outside to provide UV protection with IR heat block and Opal inside for attractive white finish with soft light quality.

Heatguard/Opal allows light in, but deflects solar radiation to reduce heat build-up by as much as 50% compared with Clear! Heatguard/Opal is a good option for South-facing conservatories.

35mm and 25mm polycarbonate sheets are great for conservatory roofs, canopies, atriums, industrial roofing and many more applications. For small applications, such as carposts, pergolas and greenhouses, a thiner 10mm or 16mm polycarbonate may suffice.

Polycarbonate is a great insulator that also reduces condensation and diffuses light. It can also be more energy efficient than glass of a comparable thickness and up to 50% cheaper.

Features & Benefits

Super strong - upto 200 times impact strength of glass
UV Resistance - minimises long-term yellowing
High resistance to impact - resistance to breakage
High thermal efficiency - triplewall and fivewall
Robust yet lightweight - fraction of glass weight
Fire safety - Class 1 Spread of Flame Protection
10 year warranty - light transmission is guaranteed

Technical Information

Detail	35mm
Detail	Clear	Opal	Bronze	Bronze/Opal	Heatguard/Opal
Weight	3.8	3.8	3.8	-	3.8
Light Transmission	50%	15%	20%	-	5%
U-value (W/m2K)	1.4	1.4	1.4	-	1.4

* Weight is measured in (kg/m)

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Accessory Items

60mm Anti-Dust Breather Tape

Breather Tape for 35mm polycarbonate 35mm polycarb with 60mm filter tape Hight tack adhesive bands 60mm Filter Tape for 35mm Polycarbonate 5m, 10m or 33m roll Ventilated and self-adhesive! High performance 60mm 'breathable' self-adhesive filter tape protects against ingress of dust, debris and insects in flutes of 35mm multi-wall polycarbonate sheeting. When used as an anti-dust tape on the open ends of polycarbonate conservatory roof panels, Filtarite provides a clean breathable filter that also allows the escape of water vapour to prevent condensation forming. Features & Benefits Prevents infestation Reduces likelyhood of condensation Easy-fit self-adhesive backing Long-lasting high tack adhesion Durable FDA approved material Filter tape of choice for over 15 years Excellent UV stability and water resistance BBA tested filtration system Filtarite performs to all relevant standards and is BBA tested and made from FDA approved materials. Remember: Polycarbonate is a great material but only effective if care is taken to prevent the growth of unsightly and damaging algae and moulds. Technical Information MeasurementValue Tape Width 60mm Tape Length 5m, 10m or 33m roll Compatibility 35mm polycarbonate sheets Declaration of Performance Filtration Information Tensile strength and elongation 45mm test width Max Load: 179.21 (N 50mm) - mean result ** Strain at Max Load: 41.05% - mean result ** Water Vapour Transmission Tested to BS 3177:1959 (1959) mean permeability 4474 (gm224h) ** Thermal Shock / Condensation In accordance with MOAT 48:1991 This test procedure is intended to replicate the ability of the filter tape to resist the passage of water and therefore the formation of condensation within the cavities of the polycarbonate under wet/heat cycling conditions. Cycle 0-25 - no leaks or condensation ** Cycle 25-50 - no leaks or condensation ** Resistance to Penetration by Particles Filter cut point 45 microns (rounded up to the nearest 5 mic) ** ** Results taken from British Boar of Agrement Test Report No: 2534 Fitting Anti-Dust Breather Tape Fitting Anti-Dust Breather tape to your polycarbonate sheets is quite straight forward when you follow these simple steps. 1. Prepare the polycarbonate sheetClean the end of the sheet where you will fit the tape. This is a good time to remove dirt or moisture from the flutes, which are the channels that run the length of the sheet. Ensure that the surface is clean and dry before...2. Positioning tape over endCut 50mm longer than the width of the sheet, to allow 25mm to wrap round both corners. Stick the pre-cut tape to the end of your sheet. Position vertically so that some tape rises above and an equal amount hangs below the end of the sheet. Then...3. Fold tape over to secureFold the overhanging strips of tape to the top and bottom face of the sheeting. Don't worry if the tape is a little longer than your sheet, you can just fold it round the end to...4. Fit End ClosureFit a protective end closure over the sheet to prevent it from being harmed by the elements.

£4.21*

Details

Bosch T313AW HCS Soft Material Jigsaw Blade (3 Pack)

Multi-Purpose Jigsaw Blade for Polycarbonate Sheets and Soft Materials (Pack of 3 blades) No more splinters and tears! Pack of 3, HCS (High Carbon Steel) blades with ultra sharp smooth serrated ground knife edge. Produces exceptionally clean cuts through multiwall polycarbonate sheets to eliminate cracks and swarf. Designed to be versatile, the BOSCH T313AW is the blabe of choice for many soft materials, such as polystyrene, insulation materials, rubber, carpet, leather, cardboard and many other soft materials. Features & Benefits Super clean cuts thanks to smooth serrated edge High Carbon Steel blade is strong with high wear resistance Versatile blade can be used with many soft materials Cuts to maximum depth of 100m Common bayonet T-shank fitting 1 Year manufacturer guarantee What you get The pack includes 3 x BOSCH T313AW multi-purpose jigsaw blades. Technical Information Product DetailValue Blade Length 100mm (152mm overall length) Blade Type Serrated, Ground Edge Blade Material High Carbon Steel Fitting Method Bayonet / T-Shank Maximum Cut Depth 100mm Manufacturer Part Number 2 608 635 187 Manufacturer Barcode 3165140045926 Manufacturer Model T313AW Manufacturer Guarantee 1 Year Guarantee Pack Size 3 x blades Usage Polystyrene, Carboard, Carpet, Rubber, Leather, Fibre Insulation and soft plastics like Multiwall Polycarbonate Sheets

£11.98*

Details

Polycarbonate Sheet Fixing Buttons (10 Pack)

Complete Fixing Buttons for Polycarbonate Sheets Pack of 10. Choice of colour and thickness Keep you polycarbonate fixed in one place! Secure polycarbonate sheets to timber rafters and reduce the risk of sheet becoming dislodged in windy conditions. Includes foam compression gaskets to stop water ingress and allow a natural expansion and contraction of the multiwall polycarbonate sheet. The compression gaskets also help prevent wind uplift and sheets being pulled out of cappings. Features & Benefits Prevents uplift by wind Allows natural expansion and contraction Protects against water ingress at fixing Complete collar with screw, screw cap cover and gasket White or Chocolate Brown for Mahogany and Rosewood uPVC 10mm, 16mm, 25mm and 35mm sheet options Fitting Polycarbonate Sheet Fixing Buttons The following general pointers are offered to help you best fit the Polycarbonate Sheet Fixing Buttons: Use a sharp steel drill bit instead of a wood one Drill at least 40mm away from the edge Drill between the ribs Do not over-tighten the screw fixing and squash the sheets - as a guide the button should not touch the sheet Using an 18mm drill bit will allow the sheet to move due to natural expansion and contraction If using a large sheet the use of a perlin can be used. Use to fix into perlins, noggins or rafters.

£5.58*

Details

Accessory Items

Tip

Sunwood Snap-Tight 25GB Glazing Bar

25GB Snap-Tight Main Glazing Bar 10/16/25mm Panels Various lengths in Brown or White Aluminium Base Bar with PVC-u Cap and End Cap Strong, extruded aluminium Base Bar with durable PVC-u Cap and decorative End Cap - complete timber rafter main bar for 10, 16 and 25mm polycarbonate. Part of Sunwood's high quality, maintenance-free Snap-Tight range of rafter bars. The extruded aluminium Base Bars feature a central recess with locking points into which the toothed legs of the PVC-u Cap are located and long-lasting EPDM rubber gaskets to cushion and form a weather-tight seal on the underside of the polycarbonate. The PVC-u Cap has coextruded seals that forms a sound, pressure seal on the top of the polycarbonate once the PVC-u Cap has been pressed firmly into position. Retro-fitted to existing timber roofs with 10, 16 or 25mm polycarbonate, the 25GB Rafter Main Bar and other Sunwood components can encase and seal problem leak areas while also breathing a new lease of life into the roof. Sunwood is equally effective on new installations too, offering an attractive, low-maintenance, long-life capping solution. Features & Benefits Coextruded Flapper Seal - compress onto glazing for weather-proof seal EPDM Gaskets in Base - acts as a seat and seal for glazing Aluminium Base Bar - strong and lightweight extrusion Flexible System - fits many roof designs and sizes Fully-Serviceable - Sunwood components can be easily removed if required Maintenance-Free - no annual painting required Designed to Integrate - neatly fits other Sunwood products Easy-Fit System - designed to ease installation 5 Year Guarantee - long product guarantee Technical Information Materials Base Bar (Aluminium extrusion. EPDB Rubber Gaskets.) Top Cap (PVC-u) End Cap (Plastic with Metal Fixing Bracket) Top Cap Size (w x h x l) 50mm x 23mm x Various (2.5m/3m/4m/6m) Base Bar Size (w x h x l) 44mm x 21mm x Various (2.5m/3m/4m/6m) Top Cap Colour White or Brown Available Lengths 3m, 4m, 5m and 6m Fitting the Sunwood Snap-Tight 25GB Rafter Main Bar Cut Base Bars to length. Drill fixing holes in the centre of each glazing bar between the upright toothed legs. Fixings should be made at no more than 450mm intervals and around 75mm in from each end. Then ensure Base Gaskets are fitted to either side of Base Bar and screw to the rafter. You can then position the pre-cut and taped polycarbonate and fit Eaves Seal Foam as a draft excluder if desired. All that is then required is to locate the PVC-u Cap over the Base Bar and press/tap firmly into position. The above is a summary only and not intended as comprehensive fitting instructions.

£16.25*

Details

35mm Opal Polycarbonate Sheets

35mm Opal Polycarbonate Sheets Any size up to 2.1m x 6m (width x length) Lightweight, tough and thermally efficient roofing panels! Opal-tinted multi-wall polycarbonate allows light in to keep it bright but reduces solar gain concentrating on one area. Eliminates uncomfortable hot-spots, creates softer light quality and provides privacy. 35mm polycarbonate sheets are great for conservatory roofs, canopies, atriums, industrial roofing and provide increased strength and performance over 25mm sheet thickness. For small applications, such as carposts, pergolas and greenhouses, a thiner 10mm or 16mm polycarbonate may suffice. Polycarbonate is a great insulator that also reduces condensation and diffuses light. It can also be more energy efficient than glass of a comparable thickness and up to 50% cheaper. Features & Benefits Super strong - upto 200 times impact strength of glass UV Resistance - minimises long-term yellowing High resistance to impact - resistance to breakage High thermal efficiency - triplewall and fivewall Robust yet lightweight - fraction of glass weight Fire safety - Class 1 Spread of Flame Protection 10 year warranty - light transmission is guaranteed Technical Information Detail35mm ClearOpalBronzeBronze/OpalHeat-guard/Opal Weight 3.8 3.8 3.8 - 3.8 Light Transmission 50% 15% 20% - 5% U-value (W/m2K) 1.4 1.4 1.4 - 1.4 * Weight is measured in (kg/m)

£26.82*

Details

35mm Bronze/Opal Polycarbonate Sheet

35mm Bronze Outside / Opal Inside Dual-tinted Polycarbonate Any size up to 2.1m x 6m (width x length) Lightweight, tough and thermally efficient roofing panels! Dual-tinted polycarbonate combining the two most popular tints. Bronze limits light transmission, minimises glare and reduces heat build up. Opal on the inside allows light in but reduces solar gain concentrating on one area. Bronze/Opal helps keep rooms cool, eliminates uncomfortable hotspots, creates a softer light and provides privacy. 35mm and 25mm polycarbonate sheets are great for conservatory roofs, canopies, atriums, industrial roofing and many more applications. For small applications, such as carposts, pergolas and greenhouses, a thiner 10mm or 16mm polycarbonate may suffice. Polycarbonate is a great insulator that also reduces condensation and diffuses light. It can also be more energy efficient than glass of a comparable thickness and up to 50% cheaper. Features & Benefits Super strong - upto 200 times impact strength of glass UV Resistance - minimises long-term yellowing High resistance to impact - resistance to breakage High thermal efficiency - triplewall and fivewall Robust yet lightweight - fraction of glass weight Fire safety - Class 1 Spread of Flame Protection 10 year warranty - light transmission is guaranteed Technical Information Detail35mm ClearOpalBronzeBronze/OpalHeatguard/Opal Weight 3.8 3.8 3.8 - 3.8 Light Transmission 50 15 20 - 5 U-value (W/m2K) 1.4 1.4 1.4 - 1.4 * Weight is measured in (kg/m)

Variants from £27.82*

£41.71*

Details

45mm ALUKAP-XR Glazing Main Bar

45mm Aluminium Capping for Timber Roofs Choice of colour, length and base gasket Discreet profile. Superior weatherproofing! Premium quality, Inner Capping for 45mm (1 3/4") timber rafters. The Main Bar comes as three parts, a mill-finished aluminium Inner Capping, an aluminium powder-coated Outer Capping and cast aluminium End Cap. The Inner Capping features rubber gaskets and creates a water-tight seal over the glazing when screwed to the rafter. All fixings are concealed and water ingress eliminated by the durable Outer Capping which snap-fixes securely over the Inner Capping. A heavy duty End Cap provides secure and decorative closure to end of bars, while helping to prevent slippage of Outer Capping and glazing material. Base Gaskets, which sit directly on timber rafters underneath the glazing material, can be supplied to provide a rubber seal under glazing material if required. Features & Benefits Extruded aluminium - strong and lightweight Maintenance-free - no annual painting required Durable powder-coating - no discolouring Long-life material - no warping or cracking Quick and simple - pre-drilled Inner Capping with snap-fix Outer Capping Custom colour option - can paint to any RAL colour Attractive profile - low contour with concealed gaskets Compatible with glass - unlick most Snap-Tight systems Shape and height of the 45mm Main Bar compliments the 60mm version, so can be used together on the same roof. The 45mm Main Bars are available in a choice of colour, length and with or without 45mm and 55mm base gaskets. Custom Colour Option - There's no problem if you want to match an existing RAL colour. Just choose 'Custom Colour' when ordering and contact us to provide the RAL code. Technical Information PropertyValue Finish Powder-coated. White, Dark Brown or Custom Colour (specify RAL code). Material Aluminium extrusion (Inner Capping and Outer Capping) EPDM rubber (Glazing Seal Gaskets and Base Gasket) Width 45mm Height 20mm Length 3m, 3.6m, 4.8m or 6m Base Gasket Option None, 45mm or 55mm Weight 720g per metre (approx) Fitting ALUKAP-XR Main Bar Cut the Inner Capping and rubber gaskets to desired length Insert gasket into Inner Capping gasket grooves If using, fix Base Gasket to timber rafter before laying glazing material Position Inner Capping on glazing, directly over rafter Drill pilot holes through pre-drilled holes in Inner Capping Screw Inner Capping down to create a uniform seal on glazing material - be careful not to over-tightening Screw the End Cap in place Use sealant to make additional seals around abutments or connections to walls, hip bars or ridge bars if required Cut Outer Capping to required length and snap-fix on to the Inner Capping The above is offered only as a guide and not as complete fitting instructions for all scenarios.

£66.16*

Details

35mm Clear Polycarbonate Sheets

35mm Clear Polycarbonate Sheets Any size up to 2.1m x 6m (width x length) Lightweight, tough and thermally efficient roofing panels! Clear multi-wall polycarbonate permits high light transmission and provides greater heat build up. Clear polycarbonate keeps it bright and light - even on the darkest winter days. Good choice for colder spots and ideal for industrial and commercial greenhouses. 35mm polycarbonate sheets are great for conservatory roofs, canopies, atriums, industrial roofing and provide increased strength and performance over 25mm sheet thickness. For small applications, such as carposts, pergolas and greenhouses, a thiner 10mm or 16mm polycarbonate may suffice. Polycarbonate is a great insulator that also reduces condensation and diffuses light. It can also be more energy efficient than glass of a comparable thickness and up to 50% cheaper. Features & Benefits Super strong - upto 200 times impact strength of glass UV Resistance - minimises long-term yellowing High resistance to impact - resistance to breakage High thermal efficiency - triplewall and fivewall Robust yet lightweight - fraction of glass weight Fire safety - Class 1 Spread of Flame Protection 10 year warranty - light transmission is guaranteed Technical Information Detail35mm ClearOpalBronzeBronze/OpalHeat-guard/Opal Weight 3.8 3.8 3.8 - 3.8 Light Transmission 50% 15% 20% - 5% U-value (W/m2K) 1.4 1.4 1.4 - 1.4 * Weight is measured in (kg/m)

£26.82*

Details

35mm Bronze Polycarbonate Sheets

35mm Bronze MultiwallPolycarbonate Sheets 35mm Bronze Polycarbonate Sheets Any size up to 2.1m x 6m (width x length) Lightweight, tough and thermally efficient roofing panels! Bronze-tinted multi-wall polycarbonate limits light transmission, minimises glare and reduces heat build up. Helping to keep conservatories room cool, Bronze is a popular choice for sunnier spots. 35mm polycarbonate sheets are great for conservatory roofs, canopies, atriums, industrial roofing and provide increased strength and performance over 25mm sheet thickness. For small applications, such as carposts, pergolas and greenhouses, a thiner 10mm or 16mm polycarbonate may suffice. Polycarbonate is a great insulator that also reduces condensation and diffuses light. It can also be more energy efficient than glass of a comparable thickness and up to 50% cheaper. Features & Benefits Super strong - upto 200 times impact strength of glass UV Resistance - minimises long-term yellowing High resistance to impact - resistance to breakage High thermal efficiency - triplewall and fivewall Robust yet lightweight - fraction of glass weight Fire safety - Class 1 Spread of Flame Protection 10 year warranty - light transmission is guaranteed Technical Information Detail35mm ClearOpalBronzeBronze/OpalHeat-guard/Opal Weight 3.8 3.8 3.8 - 3.8 Light Transmission 50% 15% 20% - 5% U-value (W/m2K) 1.4 1.4 1.4 - 1.4 * Weight is measured in (kg/m)

£26.82*

Details