Window Board 90/135° Internal Joint
Product information "Window Board 90/135° Internal Joint"
90/135° Internal Corner Joint Trim for Laminated Window Boards
Neat protective finish to old and new 23mm window board!
Tough dual-purpose plastic trim for covering and protecting either 90° or 135° internal corners on 23mm laminated window boards. Can be easily cut to required length using a junior hacksaw and the bottom return lips cut away if insert over existing window board.
One end is designed to join window boards at 90° right-angle pointing out of the room, whilst the other at 135° can be used to join between 120° and 150°. Available in a choice of colours and with a foiled finish to perfectly match your window board, these maintenance-free joints are easy to install, are heat and moisture resistant and made to the highest British Standard quality.
Features & Benefits
- Tough uPVC - excellent protection from moisture, scratches and stains
- Authentic foiled finish - your joint will perfectly match your window boards
- Maintenance-free - the occasional wipe keeps it looking new
- Easy to fit - with no mechanical fixings only superglue is required
- British standard quality - backed by a 10 year guarantee
Technical Information
| Product Detail | Value |
|---|---|
| Size | Width: 27mm (1in) Height: 13mm (1/2in) Length: 393m (1ft 3in) |
| Material | UPVC |
| Finish & Colour | Available in White, Anthracite Grey and Foiled Finish in Rosewood, Golden Oak and Light Oak |
Fitting and Usage
If necessary cut your joint to the correct size, and superglue the inside and place firmly onto the board. Repeat on the other side.
If you need to retro-fit your joint, you may have to trim the underside for correct fitting.
Top Tip: When gluing, we recommend using an activator for a quick dry solution.
| Window Usage: | Internal Window Board |
|---|
Login
Accessory Items
Saves Nails Instant Grab Adhesive
From
£1.87*
Instant Grab Adhesive
Fast Bonding General Purpose Adhesive
Beige, 285ml
Alternative to mechanical fixings - no more nails!
Fast bonding, non-slumping, multi-purpose adhesive for interior and exterior use on wood, masonry and metals.
Saves Nails rubber-based adhesive is an alternative to mechanical fixings and is capable of filling gaps of up to 12mm. Used in a wide variety of domestic, commercial and industrial applications, including: wall fixings, fixing skirting board and architrave, window frames and sills, cladding, wall battens, brick, stone and concrete, ceramic, marble and brick veneer, timber, metal, some plastics and insulating PU foams
Features & Benefits
Interior and exterior use
Instant grab
Non-slumping
Can paint over Saves Nails
Use on many materials
Toluene Free
Bridges gaps up to 12mm
Technical Information
MeasurementValue
Flammability
Highly Flammable
Boiling Point
65°C
Full Cure Time
48 hours*
Flashpoint
-40°C
Vapour Density
3
Vapour Pressure
140mm @ 20°C
* Depending on bead thickness and temperature.
Limitations
Not suitable for areas subject to frequent water immersion. Not recommended for use on asphalt, bitumen or polystyrene. Not to be used as a mirror adhesive. Dusty or porous surfaces should be primed.
Laminated Window Board (1.36m)
£26.42*
1.36m Long Laminated Window Board
(Choice of width and colour)
Super strong and moisture-resistant!
Attractive, maintenance-free board for internal window cills. Moisture resistant 23mm thick chipboard, available in choice of widths with scratch and stain resistant laminate woodgrained finish.
These 1.36m long (53.5") boards can be easily cut to suit individual cill length or depth and mitred to follow corners, with matching end caps and corner joints are available separately to form an impressive finish
Features & Benefits
Quick and easy fitting - minimal time and tools required and no mechanical fixings
Long-life durability - scratch, stain and moisture resistant chipboard
Colour and width choice - sizes and colours available to suit your application
Maintenance-free - wipe clean surface with no painting required
British Standard - backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Length
1.36m (53.5")
Thickness
23mm (.6")
Width
100mm, 150mm, 200mm, 225mm, 250mm, 300mm
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Anthracite Grey (GR), Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal window board, shelving, boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.
Variants from £12.97*
Laminated Window Board (5m)
£53.24*
5m Long Laminated Window Board
(Choice of width and colour)
Super strong and moisture-resistant!
Attractive, maintenance-free board for internal window cills. Moisture resistant 23mm thick chipboard, available in choice of widths with scratch and stain resistant laminate woodgrained finish.
These 5m long (16.4") boards can be easily cut to suit individual cill length or depth and mitred to follow corners, with matching end caps and corner joints are available separately to form an impressive finish
Features & Benefits
Quick and easy fitting - minimal time and tools required and no mechanical fixings
Long-life durability - scratch, stain and moisture resistant chipboard
Colour and width choice - sizes and colours available to suit your application
Maintenance-free - wipe clean surface with no painting required
British Standard - backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Length
5m (16.4")
Thickness
23mm (.6")
Width
100mm, 150mm, 200mm, 225mm, 250mm, 300mm
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal window board, shelving, boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.
Wide Laminated Window Board (3m)
£135.64*
Laminated Window Board (3m)
(Choice of width and colour)
Super strong and moisture-resistant!
Attractive, maintenance-free board for potential use in various applications such as internal sills, as bay and bow window boards, counter tops, shelving and more. Moisture resistant 23mm thick chipboard, available in choice of widths with scratch and stain resistant laminate woodgrained finish.
These 3m long (118”) boards can be easily cut to suit individual cill length or depth and mitred to follow corners, with matching end caps and corner joints are available separately to form an impressive finish
Features & Benefits
Quick and easy fitting – minimal time and tools required and no mechanical fixings
Long-life durability – scratch, stain and moisture resistant chipboard
Colour and width choice – sizes and colours available to suit your application
Maintenance-free – wipe clean surface with no painting required
British Standard – backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Length
3m (118")
Thickness
23mm (.6")
Width
600mm and 900mm
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal Window Sill, Bay and Bow Window Boards, Counter Tops, Shelving, Boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.
Variants from £75.60*
Laminated Window Board (1m)
£14.57*
1m Long Laminated Window Board
(Choice of width and colour)
Super strong and moisture-resistant!
Attractive, maintenance-free board for internal window cills. Moisture resistant 23mm thick chipboard, available in choice of widths with scratch and stain resistant laminate woodgrained finish.
These 1m long (39") boards can be easily cut to suit individual cill length or depth and mitred to follow corners, with matching end caps and corner joints are available separately to form an impressive finish
Features & Benefits
Quick and easy fitting - minimal time and tools required and no mechanical fixings
Long-life durability - scratch, stain and moisture resistant chipboard
Colour and width choice - sizes and colours available to suit your application
Maintenance-free - wipe clean surface with no painting required
British Standard - backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Length
1m (39")
Thickness
23mm (.6")
Width
100mm, 150mm, 200mm, 225mm, 250mm, 300mm
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Anthracite Grey (GR), Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal window board, shelving, boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.
Variants from £5.39*
Laminated Window Board (2.5m)
£44.93*
2.5m Long Laminated Window Board
(Choice of width and colour)
Super strong and moisture-resistant!
Attractive, maintenance-free board for internal window cills. Moisture resistant 23mm thick chipboard, available in choice of widths with scratch and stain resistant laminate woodgrained finish.
These 2.5m long (98.4") boards can be easily cut to suit individual cill length or depth and mitred to follow corners, with matching end caps and corner joints are available separately to form an impressive finish
Features & Benefits
Quick and easy fitting - minimal time and tools required and no mechanical fixings
Long-life durability - scratch, stain and moisture resistant chipboard
Colour and width choice - sizes and colours available to suit your application
Maintenance-free - wipe clean surface with no painting required
British Standard - backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Length
2.5m (98.4")
Thickness
23mm (.6")
Width
100mm, 150mm, 200mm, 225mm, 250mm, 300mm
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Anthracite Grey (GR) Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal window board, shelving, boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.
Variants from £22.60*
Window Board 90° External Corner and Joint
£1.98*
90° External Corner and Inline Joint Trim for Laminated Window Boards
(Choice of colour available)
Neat protective finish to old and new 23mm window board!
Tough dual-purpose plastic trim for covering and protecting 90° external corners or inline joints on 23mm laminated window boards. Can be easily cut to required length using a junior hacksaw and the bottom return lips cut away if insert over existing window board.
These easy to install trims, are heat and moisture resistant and available in a choice of colours to match existing window boards, with Light Oak, Golden Oak and Rosewood having a realistic woodgrain finish.
Features & Benefits
Durable PVC-u - excellent protection from moisture, scratches and stains
Realistic foiled finish - your joint will perfectly match your window boards
Maintenance-free - the occasional wipe keeps it looking new
Easy installation - with no mechanical fixings only superglue is required
British standard quality - backed by a 10-year guarantee
The more pointed end of the joint trim is the end to use when covering a 90° external corner that points into the room, whilst the other end is used for covering the rounded from of inline joints.
Technical Information
Product DetailValue
Size
Width: 27mm (1in) Height: 14mm (1/2in) Length: 422m (1ft 5in)
Material
UPVC
Finish & Colour
Available in White, Anthracite Grey, Chocolate Brown, Caramel, Rosewood (woodgrain), Golden Oak (woodgrain) and Light Oak (woodgrain)
Fitting and Usage
If necessary cut your joint to the correct size, and superglue the inside and place firmly onto the board. Repeat on the other side.
If you need to retro-fit your joint, you may have to trim the underside for correct fitting.
Top Tip: When gluing, we recommend using an activator for a quick dry solution.
Accessory Items
Laminated Window Board (Sample)
£0.55*
Sample Laminated Window Board
(Choice of colour)
Super strong and moisture-resistant!
Small sample section of moisture resistant 23mm thick chipboard with scratch and stain resistant laminate woodgrained finish. Attractive and durable maintenance-free board for internal window cills.
This sample board with matching end caps and corner joints (available separately) can be combined to form an impressive finish
Features & Benefits
Quick and easy fitting – minimal time and tools required and no mechanical fixings
Long-life durability – scratch, stain and moisture resistant chipboard
Colour choice – colours available to suit your application
Maintenance-free – wipe clean surface with no painting required
British Standard – backed by a 10 year manufacturer guarantee
Technical Information
Technical Specification
Thickness
23mm (.6")
Material
Chipboard with laminated top (26mm wrap around)
Colour
White (WH), Anthracite Grey (GR), Light Oak (LO), Golden Oak (WO), Rosewood (RO)
Guarantee
Guaranteed for 10 years
Applications
Internal window board, shelving, boxing-in and more
Fitting and Usage
Start by measuring the depth and width of the window reveal.
Window boards are often cut to project out past the wall and wrap around the wall on either side. The wrap around are called joggles and you should add the desired overhang and joggle length to your measurements.
Measure and mark the board. Double check your measurements and then cut the board to size.
The board can be stuck down with a quick grab contact adhesive or mechanical fixings.
Decorators caulk or stanard builders silicone sealant can be used for a tidy finish along the cut edges.