Sunwood Screw-Down Glazing Hip Bar

Brown Sunwood Screw-Down Glazing Hip Bar for Conservatory Lean-to Roof

£86.53*

Prices incl. VAT plus shipping costs

Available, delivery time: 5 days

Colour

Brown

White

Length

Product number: LIV-1169-1001

Product information "Sunwood Screw-Down Glazing Hip Bar"

Glazing Hip Bar from Sunwood

Various lengths in Brown or White finish

Screw-Down Hip Bar Gasket with Aluminium Cap

Attractive and strong aluminium extrusion with tough powder-coated finish and long-lasting EPDM rubber gaskets. Part of the high quality, maintenance-free, Sunwood Timber Glazing System.

This Screw-Down rafter hip bar includes powder-coated aluminium Rafter Hip Bar Top Cap with detachable Cover Cap to conseal and protect fixings. Rafter Hip Bar incorporates integrated High Side EPDM Rubber Gasket for water-tight seal against top side of glazing and a separate EPDM Base Gasket (with removable central pip) that is fixed to timber hip rafters to act as a seat and seal on the underside of glazing.

Sunwood Screw-Down Rafter Hip Bar Dimensions

Features & Benefits

Broad Angled Profile - accomodates change in pitch
Use with Jack Spars - includes ledge to cover adjoining Jack Spars
Any Glazing - use with glass or polycarbonate of any thickness
High Side EPDM Gaskets - compreses onto glazing for weather-proof seal
EPDM Base Gasket - acts as a seat and seal for glazing
Removable Central Pip - use with grooved or non-grooved rafters
Strong and lightweight - quality aluminium extrusion
Quality Powder-Coating - durable, consistent finish
Flexible System - fits many roof designs and sizes
Fully-Serviceable - Sunwood components can be easily removed if required
Maintenance-Free - no annual painting required
Designed to Integrate - neatly fits other Sunwood products
Easy-Fit System - designed to ease installation
5 Year Guarantee - long product guarantee

These Screw-Down Rafter Hip Bars should be used when fitting to hip spars of Edwardian (4-sided) and Victorian (5-sided) conservatories. The exception to this is Victorian conservatories that have a front roof pitch equal to the side pitch, which can use the standard Screw-Down Rafter Main Bars. Note that on a roof using the Sunwood Rafter Hip Bars, the Plastic Spider Top Cap should be used in favour of the aluminium cast Sunwood Spider. This allows the profile of any hip and main bars to be cut from the Spider and the Spider sit properly on the ridge.

Retro-fitted to hip rafters of existing 5-40° pitched timber roofs, these Rafter Hip Bar and other Sunwood components can encase and seal problem leak areas while also breathing a new lease of life into the roof. Sunwood is equally effective on new instalations too, offering an attractive, low-maintenance, long-life capping solution.

Technical Information

Finishes	Powder-coated White or Brown
Material	Aluminium extrusion (Main Bar Top Cap and Cover Cap) EPDM rubber (High Side Gaskets and Base Gasket)
Top Cap Width	85.3mm
Top Cap Height	23.98mm (excl. High Side Gasket)
Base Gasket Width	57mm
Base Gasket Height	8mm (uncompressed and including pip)
Available Lengths	4m, 5m and 6m
Pitch	5-40° (deviance approx 10°)

Fitting the Sunwood Screw-Down Rafter Hip Bar

Base Gaskets should be fitted to timber rafter. If timbers do not have a 3mm groove, then the central Pip that runs down the underside of the Base Gasket can be removed. Base Gasket should be cut to a length that allows it to over hand the gutter and fixed to the rafter with staples or similar. End Caps should be fitted and the Hip Bars cut to length before being screwed down onto the timber rafters at 300mm intervals. This will form a nice tight seal of the High Side EPDM Gasket onto the roof material. The Cover Cap is easy to fit using the two cover cap locators that run parallel down the length of the Hip Bar - just hook the Cover Cap over one cover cap locators and pivot down onto other for a tight snap fit.

The above is a summary only and not intended as comprehensive fitting instructions.

Base Material:	Rubber
Capping Material:	Aluminium
Glazing Compatibility:	Glass (Double-Glazed), Glass (Single Pane), Polycarbonate (Multiwall), Polycarbonate/Acrylic (Solid)
Glazing Thickness:	10mm, 16mm, 24/25mm, 32mm, 35mm, Any
Roof Structure:	Timber Supported
Style:	Sunwood Screw-Down

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Accessory Items

25mm Polycarbonate End Closure

End Closure for 25mm Polycarbonate Sheets (White, Brown or Anthracite Grey) Seal and protect the ends of your polycarbonate sheets and glass units Also known as "U" Drips, Poly End Covers and End Profile Trims, these End Closures are designed to protect ends and form a tight seal to the top of polycarbonate sheeting using it's flexible, co-extruded gasket. End closures are typically fitted to the gutter-end of pitched roofs, such as those of a conservatory, or to both ends of a free-standing roof. Provides decorative protection to the vulnerable ends of polycarbonate sheeting. Features & Benefits Seals open end of polycarbonate sheet Helps prevent dust and insects entering the sheet No need to use silicone to seal the end closure Co-extruded gasket stops water penetration from above Protects vented anti-dust breather tape Prevents UV light breaking down the glass units seal Drip design prevents water from being blown back towards the roof Drainage holes reduce condensation and moisture Extend the life of your roof With three sides protected by glazing bars and ridge capings, the gutter end is often the only edge of polycarbonate sheets that are exposed. When left exposed, the breather tape that is applied to the open fluted ends of the sheets become wet and deteriate. This leads to failure of the tape and the sheets flutes suffering condensation, algae build-up and insect penetration. Fitting End Closures helps stop this from happening. These End Closures are designed with a 3mm 'drip' on the front edge, to stop water running back towards the roofing material and drainage holes to ventilate and release any water that gets into the end closure. Glass units are also protected by end closures. Even though the glass roof units are sealed they can still be damaged by the elements - UV light can break down the seal and cause the unit to fail. Technical Information Finishes White, Chocolate Brown or Anthracite Grey Material PVC-u Glazing Thickness 25mm Length 2.1m (White and Brown), 2.5m (Anthracite Grey)

£4.82*

Details

End Cap for Sunwood Screw-Down Conservatory Roof Glazing Hip Bar

Sunwood Screw-Down Glazing Hip Bar End Cap

Hip Bar End Cap from Sunwood Available in White, Brown or uncoated Mill finish Powder-coated Aluminium End Cap for Glazing Hip Bars Stylish and tough cast aluminium End Cap with Sunwood's recognisable Sun symbol and durable powder-coated finish. Part of the high quality, maintenance-free, Sunwood Timber Glazing System. Offers protection and decorative finish to the ends of Sunwood Rafter Hip Bars. Features & Benefits Solid construction - aluminium cast Decorative - features recognisable Sun symbol Quality Powder-Coating - durable, consistent finish Fully-Serviceable - Sunwood components can be easily removed if required Maintenance-Free - no annual painting required Easy-Fit System - designed to ease installation 5 Year Guarantee - long product guarantee Technical Information Finishes Powder-coated White, Brown or Mill (uncoated) Material Aluminium cast Width 102mm Height 89mm Thickness 4mm Fitting the Sunwood Rafter Hip Bar End Caps Fitting these End Caps is really straight forward. The End Cap is cast with a ledge on the rear that slides into the fixing channel on the Rafter Hip Bar. The ledge has a pre-drilled hole that allows the supplied countersunk screw to be used to secure the End Cap to the Rafter Hip Bar.

Variants from £6.30*

£7.09*

Details

16mm Polycarbonate End Closure

End Closure for 16mm Polycarbonate Sheets (White, Brown or Anthracite Grey) Seal and protect the ends of your polycarbonate sheets Also known as "U" Drips, Poly End Covers and End Profile Trims, these End Closures are designed to protect ends and form a tight seal to the top of polycarbonate sheeting using it's flexible, co-extruded gasket. End closures are typically fitted to the gutter-end of pitched roofs, such as those of a conservatory, or to both ends of a free-standing roof. Provides decorative protection to the vulnerable ends of polycarbonate sheeting. Features & Benefits Seals open end of polycarbonate sheet Helps prevent dust and insects entering the sheet No need to use silicone to seal the end closure Co-extruded gasket stops water penetration from above Protects vented anti-dust breather tape Drip design prevents water from being blown back towards the roof Drainage holes reduce condensation and moisture IMPORTANT SIZE INFORMATION These end closures are designed to fit 16mm thick sheets, and are supplied in 2.1m lengths for white and brown, and 2.5m length for anthracite grey. Extend the life of your roof With three sides protected by glazing bars and ridge capping, the gutter end is often the only edge of polycarbonate sheets that are exposed. When left exposed, the breather tape that is applied to the open fluted ends of the sheets become wet and deteriorate. This leads to failure of the tape and the sheets flutes suffering condensation, algae build-up and insect penetration. Fitting End Closures helps stop this from happening. These End Closures are designed with a 3mm 'drip' on the front edge, to stop water running back towards the roofing material and drainage holes to ventilate and release any water that gets into the end closure. Technical Information Colour White, Chocolate Brown, and Anthracite Grey Material PVC-u Glazing Thickness 16mm Length 2.1m (White and Chocolate Brown), 2.5m (Anthracite Grey)

£4.44*

Details

10mm Polycarbonate End Closure

End Closure for 10mm Polycarbonate Sheets (White, Brown or Anthracite Grey) Seal and protect the ends of your polycarbonate sheets Also known as "U" Drips, Poly End Covers and End Profile Trims, these End Closures are designed to protect ends and form a tight seal to the top of polycarbonate sheeting. End closures are typically fitted to the gutter-end of pitched roofs, such as those of a conservatory, or to both ends of a free-standing roof. Provide decorative protection to the vulnerable ends of polycarbonate sheeting. Features & Benefits Seals open end of polycarbonate sheet Helps prevent dust and insects entering the sheet Protects vented anti-dust breather tape Drip design prevents water from being blown back towards the roof Drainage holes reduce condensation and moisture IMPORTANT SIZE INFORMATION These end closures are designed to fit 10mm thick sheets, and are supplied in 2.1m lengths for white and brown, and 2.5m length for anthracite grey. Extend the life of your roof With three sides protected by glazing bars and ridge capping, the gutter end is often the only edge of polycarbonate sheets that are exposed. When left exposed, the breather tape that is applied to the open fluted ends of the sheets become wet and deteriorate. This leads to failure of the tape and the sheets flutes suffering condensation, algae build-up and insect penetration. Fitting End Closures helps stop this from happening. These End Closures are designed with a 3mm 'drip' on the front edge, to stop water running back towards the roofing material. Technical Information Colours White, Chocolate Brown and Anthracite Grey Material PVC-u Glazing Thickness 10mm Length 2.1m (White and Brown), 2.5m (Anthracite Grey)

Variants from £3.97*

£8.20*

Details