Ready-to-use solvent-based aerosol, dissolves uncured spilled PU foam, and cleans foam guns and spray nozzles after use. Unclogs valves and nozzles, quickly and easily.
Cleaning of PU foam guns after each use is critical to them working efficiently time and time again. This clear professional-grade aerosol ensure that you get the most from your tools.
Features & Benefits
Helps keep gun valves and nozzles clean
Quickly dissolves and cleans uncured foam
Excellent cleaning and degreasing properties
Environmentally friendly without HCFC/CFC propellants
Supplied with short spray nozzle for gun-free use
Technical Information
Measurement
Value
Volume
500ml
Base
Acetone
Consistency
Aerosol
Shelf Life
24 months unopened and stored in dry and cool conditions (5° to 25°C)
Using Soudabond Foam and Gun Cleaner
Clean foam guns and nozzles internally by screwing the can onto the gun and pulling the trigger, repeat several times, with 10-15 seconds interval between each. The gun can be cleaned externally using the short spray nozzle supplied, as can and uncured spillages. Cured foam must be removed mechanically.
Remember that cleaning of guns and surfaces should be done immediately prior to foam curing, and surface tests are recommended prior to use, as some surfaces, such as plastics and lacquer, or paint layers, can be sensitive.
0 of 0 reviews
Leave a review!
Share your experiences with other customers.
Login
No reviews found. Be the first to share your insights.
Soudafoam PU Foam Gap Filler
(Gun Grade or Genius Gun)
Quick and easy bonding and sealing!
Easy to use, rapid curing polyurethane expanding foam filler. Soudafoam Gap Filler gives primerless adhesion on most construction materials with high gap filling expansion.
Soudafoam Gap Filler PU polyurethane foam, which can be cut, sawn, sanded, painted or plastered over, is commonly used in the installation of windows and door frames, filling cavities, and sealing openings.
Features & Benefits
Ready to use from can - one-component with no mixing
High filling capacity - yields 3.1 litres per can
Environmentally friendly - free of Freon, HCFC and CFC
Improved performance - features unique DuraValve
Quick curing - cut within 25 minutes
Excellent stability - no shrinkage or post-expansion
High insulation value - thermal and acoustic
Good adhesion - bonds most surfaces
Did you know? Soudafoam Gap Filler is available in Gun Grade form for gun applicators, and Genius Gun, which features a trigger mechanism of its own for precise one-handed application and a built-in closing system for re-use.
Applications
Installing of window and door frames
Filling of cavities
Sealing of all openings in roof constructions
Apply of an acoustic baffle
Improving thermal isolation in cooling systems
Technical Information
MeasurementValue
Volume
750ml (Gun Grade), 600ml (Genius Gun)
Colour
Champagne
Shelf Life
24 months unopened and stored in dry and cool conditions (5° to 25°C). Upright storage is recommended.
Base
Polyurethane
Consistency
Stable foam, thixotropic
Curing system
Moisture curing
Skin Formation (FEICA TM 1014)
7 min
Cutting Time (FEICA TM 1005)
25 min
Free foamed density (FEICA TM 1019)
Ca. 30Kg/m³
Sound insulation (EN ISO 717-1)
58 dB
Box Yield (FEICA TM 1003)
750 ml yields ca. 37L of foam
Shrinkage after curing (FEICA TM 1004)
< 3%
Expansion after curing (FEICA TM 1004)
< 1%
Percentage closed cells (ISO4590)
Ca. 21%
Reaction to fire classification (EN 13501-1)
No fire classification (F)
Compressive strength (FEICA TM 1011)
Ca. 36kPa
Tensile Strength (FEICA TM 1018)
Ca. 101kPa
Elongation at Fmax (FEICA TM 1018)
Ca. 12.2%
Temperature resistance
-40°C to +90°C (cured)
Adhesion Compatibility
Good adhesion on all surfaces, except PE, PP and PTFE
UV Resistant
No
Using Soudal Gap Filler
Shake the aerosol can for at least 20 seconds. Fit the gun on the adapter. Surface should be free from grease and dust. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates, a preliminary adhesion test is recommended. Fill holes and cavities for 65 %, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer. Fresh foam can be removed using Soudal Gun & Foam cleaner or acetone. Cured foam can only be removed mechanically or with Soudal PU-Remover.
Soudabond Easy PU Adhesive Foam
(Gun Grade or Genius Gun)
Easy bonding and easy filling!
Quick and easy to use high performance polyurethane adhesive foam. Bonds many materials and combines strong adhesion with filling characteristics, making Soudabond Easy ideal for uneven surfaces.
No more heavy loads and messy time-consuming mixing, one 750ml can is equivalent to 25Kg of powder adhesive. Soudabond Easy replaces traditional powder-based adhesives.
Features & Benefits
Ready to use without any mixing
Quick drying and cures within 1 hour
Bonds up to 14m2 of wall panels
High initial adhesion - even at low temperatures
Gap fills irregularities
Flexible and non-brittle
Provides thermal and acoustic insulation
Much lighter than other adhesives
Did you know? Soudabond Easy is available in Gun Grade form for gun applicators, and Genius Gun, which features a trigger mechanism of its own for precise one handed application and a built-in closing system for re-use.
Applications
Durable, economical, clean and efficient bonding of thermal insulation panels.
Suitable for bonding insulation panels based on rigid PS (EPS + XPS), polyurethane (PUR / PIR) and phenolic foam in areas: platform roofs, perimeters, facades, drainage or insulation elements, cellar ceilings, interior insulation, etc
Bonding of fibro-plaster / cardboard plaster panels in dry construction
Bonding of non-load-bearing interior walls, such as partitions, stone shelves, etc
Technical Information
MeasurementValue
Volume
750ml (Gun Grade), 600ml (Genius Gun)
Colour
Orange
Shelf Life
24 months from date of production in unopened packaging with cool (+5°C to +25°C) and dry storage. Cans must be stored upright.
Base
Single component polyurethane
Consistency
Stable adhesive foam (does not sag)
Curing system
Moisture cure at room temperature
Curing speed (*)
About 30 minutes - 30 mm adhesive bead
Skin formation (*)
About 8 minutes - 30 mm adhesive bead
Can be trimmed (’)
About 50 minutes - 30 mm adhesive bead
Full strength (*)
About 12 hours - 30 mm adhesive bead
Post expansion
minimal
Thermal conductivity (DIN 52612)
About 0.035 W/(m·K)
Tensile strength (DIN EN 1607)
0,19 N/mm²
Shear strength (DIN EN 12090)
0,142 N/mm²
Shear modulus (DIN EN 12090)
0,489 N/mm²
Temperature resistance
-40°C to +90°C. +120°C (up to max. 1 hour)
Building material class (DIN 4102, part 1)
B2
* Measured at 20°C/65% R.H. These values may vary depending on ambient factors such as temperature, humidity and type of substrate.
Using Soudabond Easy PU Adhesive Foam
Please refer to the Technical Datasheet for usage under applications such as: Flat Roof Insulation, Perimeter Insulation, Facade/Wall Insulation, Cellar Ceiling Insulation, Interior Insulation/Dry Lining, Interior Insulation Panels, Plasterboard, Concrete Block and more.
Soudal PU Expanding Foam Combi-Box
(Gap Filler Foam, Gun and Cleaner)
Filler, applicator and cleaner, in one box!
Gap filling bundle with rapid curing polyurethane expanding foam, professional PU applicator gun, and foam gun cleaner; everything needed for quick and easy bonding and sealing.
Soudafoam Gap Filler PU polyurethane foam, which can be cut, sawn, sanded, painted or plastered over, is commonly used in the installation of windows and door frames, filling cavities, and sealing openings.
Features & Benefits
Everything needed to apply and clean
Environmentally friendly and rapid curing
Six canisters yield 18 litres of foam
Professional grade metal applicator gun
Aerosol cleaner for valves, nozzles and surfaces
Applications
Installing of window and door frames
Filling of cavities
Sealing of all openings in roof constructions
Apply of an acoustic baffle
Improving thermal isolation in cooling systems
What you get in the Soudal Expanding Foam Combi-Box
PU Foam (x 6)
Easy to use, rapid curing polyurethane expanding foam filler. Soudafoam Gap Filler gives primerless adhesion on most construction materials with high gap filling expansion.
Applicator Gun
Professional heavy-duty applicator for use with gun grade PU expanding foam canisters. Easy to use with great precision and flow control, means neater and more efficient work.
Foam Gun Cleaner
Ready-to-use solvent-based aerosol for dissolving uncured spilled PU foam, and cleaning foam guns after use. Use immediately after gun use to easily unclogs valves and nozzles.
Technical Information
Soudal Gap Filler
MeasurementValue
Volume
750ml per can (4.5L total)
Yield
3.1L per can (18L total)
Colour
Champagne
Shelf Life
24 months unopened and stored in dry and cool conditions (5° to 25°C). Upright storage is recommended.
Base
Polyurethane
Consistency
Stable foam, thixotropic
Curing system
Moisture curing
Skin Formation (FEICA TM 1014)
7 min
Cutting Time (FEICA TM 1005)
25 min
Free foamed density (FEICA TM 1019)
Ca. 30Kg/m³
Sound insulation (EN ISO 717-1)
58 dB
Box Yield (FEICA TM 1003)
750 ml yields ca. 37L of foam
Shrinkage after curing (FEICA TM 1004)
< 3%
Expansion after curing (FEICA TM 1004)
< 1%
Percentage closed cells (ISO4590)
Ca. 21%
Reaction to fire classification (EN 13501-1)
No fire classification (F)
Compressive strength (FEICA TM 1011)
Ca. 36kPa
Tensile Strength (FEICA TM 1018)
Ca. 101kPa
Elongation at Fmax (FEICA TM 1018)
Ca. 12.2%
Temperature resistance
-40°C to +90°C (cured)
Adhesion Compatibility
Good adhesion on all surfaces, except PE, PP and PTFE
UV Resistant
No
Soudal Foam Gun Cleaner
MeasurementValue
Volume
500ml
Base
Acetone
Consistency
Aerosol
Shelf Life
24 months unopened and stored in dry and cool conditions (5° to 25°C)
Get the Most from your Combi-Box
Using Gap Filler and Gun
Shake the aerosol can for at least 20 seconds. Fit the gun on the adapter. Surface should be free from grease and dust. Moisten surfaces with a water sprayer prior to application. For non-conventional substrates, a preliminary adhesion test is recommended. Fill holes and cavities for 65 %, as the foam will expand. Repeat shaking regularly during application. If you have to work in layers repeat moistening after each layer.
Using Foam Gun Cleaner
Clean foam guns and nozzles internally by screwing the can onto the gun and pulling the trigger, repeat several times, with 10-15 seconds interval between each. The gun can be cleaned externally using the short spray nozzle supplied, as can and uncured spillages. Cured foam must be removed mechanically.
Remember that cleaning of guns and surfaces should be done immediately prior to foam curing, and surface tests are recommended prior to use, as some surfaces, such as plastics and lacquer, or paint layers, can be sensitive.
Solvent Cleaner for PU Foam Guns
500ml
Dissolves fresh foam to prolong gun life
High strength, cleaning solvent for removal of fresh, uncured PU foam from foam applicator guns to maintain good working order.
The canister is fitted with an Adapter Ring and Spray Head so cleans efficiently, outside and inside the gun.
The Adapter Ring allows the canister to be screwed onto a standard foam gun and solvent cleaner to be released, using the gun trigger, through the gun nozzle. While the Spray Head allows the can to be used as a handheld aerosol to spray and clean the outer parts.
Contains an environmentally safe propellant, which complies with EU-regulations. Developed and manufactured in accorance with the ISO 9001/EN 29001 quality assurance system.
Features & Benefits
Safe and effective - active ingredients consistent with materials used in manufacture of PU foam guns
Quality assurance - manufactured to ISO 9001/EN 29001
Cleans inside - fit to gun and release cleaner through nozzle
Cleans outside - spray over external parts
Technical Information
MeasurementValue
Volume
500ml
Application
Handheld spray/Run-through gun