Rigid Angle 90° Corner Trim (2.5m)

Product information "Rigid Angle 90° Corner Trim (2.5m)"

Rigid Angle uPVC Corner Trim (2.5m)

(Choice of size and colour)

Long, yet easy to transport and handle!

2.5m long, durable rigid angle cover trim, for concealing unsightly joints and preventing ingress of water and debris on 90° external corners. Long-lasting, maintenance-free uPVC plastic angle bead, in various colours and sizes.

These L-shaped rigid angles have high impact strength, yet remain lightweight, so easy to handle and fit. All sizes are offered as solid extrusions, with the 100mm x 80mm also available as a 6mm hollow board.

Features & Benefits

Tough and durable - protects external corners
Professional finish - conceal unsightly corners
Quick and easy fitting - simply cut, and stick
Interior or exterior use - exterior grade uPVC
Reduces maintenance - no painting and easy clean

Did you know? We also sell these rigid angles in 1m (3ft 3in), and 5m (16ft 5in) lengths.

Application

Technical Information

Measurement	Value
Material	uPVC plastic (some colours laminated)
Profile Size	25mm x 25mm, 40mm x 40mm, 60mm x 60mm, 80mm x 80mm, 100mm x 80mm. All offered as solid profile, with 100mm x 80mm also available as hollow.
Profile Thickness	3mm (60 x 60, 80 x 80, 100 x 80 solid profile), 1.5mm (25 x 25 and 40 x 40 solid profile), 6mm (hollow profile)
Length	2.5m (8ft 2in). Available as 1m (3ft 3in), and 5m (16ft 5in) in other listings.
Colours	White (64), Irish Oak (WLO1), Golden Oak (WO), Rosewood (RO), Anthracite Grey (WGY1S), Black Ash (WY)
Accreditations	BSI Approved
Guarantee	20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated)

Fitting uPVC Plastic Rigid Angle

Fitting the rigid angle is quick and easy. If you haven’t fitted them before, the following key points may be helpful:

For cutting, we recommend the use of gasket shears, or junior hacksaw.
Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape.
It is often recommended that only one internal face is stuck, as this allows for expansion and contraction, without risk of the trim splitting.
Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use.
Future cleaning should require no more than a wipe with warm soapy water.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Accessory Items

Super Glue Mitre Kit Adhesive

Mitre Kit Superglue and Activator Super Fast Bonding of uPVC Trims and More 50g Superglue + 200ml Activator Spray Thicker, less-runny formula! Two part, fast-acting, high strength bonding of uPVC window and door trims. Comprises a cyanoacrylate high viscosity adhesive with an aerosol activator to ensure full and rapid curing. Super glue is an ideal adhesive for many uses include modelling, jewelry making and repairs to toys, household appliances, car aprts and more. Super glue can be used to bond: plastic, PVC and polycarbonate woods, MDF, chipboard and cork metal, ceramics and rubber leather and fabric paper and cardboard The non-staining activator spray can be used with Super Glue to give instant cure and bonding in seconds. Features & Benefits Fast-acting - bonds in seconds Many uses - bonds many materials Easier to apply - high viscocity, so not as runny as other superglues Technical Information MeasurementValue Pack Contents Superglue (50g)Activator Spray (200ml) Viscosity High Superglue Cure Time Seconds (with Activator Spray)< 1 minute (without Activator Spray) Mitre Kit Application Super Glue is a really effective product when used on it's own but when combined with Super Glue Activator it becomes even more incredible, providing almost instant bonding. Clean surfaces to be bonded. Spray activatory onto one of the surfaces and allow to evaporate. Apply a small amount of super glue to the other surface and assemble.* *As with all fixatives, care should be taken during use and the product should be stored in a safe place out of the reach of children. Refer to product for recommendations.

From £3.28*

Details

Soudal Fix ALL Turbo Sealant & Adhesive

Soudal Fix ALL Turbo Super-Fast Sealant & Adhesive (White, 290ml EU3 cartridge) Super-fast bonding - even on wet surfaces! Super-fast elastomeric adhesive, sealant and filler that provides a hand-tight bond in just 20 minutes. Use internally or externally and apply in all weather conditions, on most materials, including wet and damp surfaces. Fix ALL Turbo is a high quality single component solvent-free adhesive-sealant based on SMX-Polymer with very fast build-up of strength. 290ml EU3 cartridge (with nozzle) fits standard skeleton gun applicators. Features & Benefits Super-fast bonding - fixed in 20 mins and full strength in 3 hours (adjustable for 5 mins) High strength adhesive - double strength of standard sealants High initial tack - reduces the need initial support Easy to use - apply with cartridge gun and tool finish All-weather use - can be applied in all conditions Permanently elastic - remains flexible after curing Good colour stability - weather and UV resistant Can be overpainted - overpaint with water-based paints Quality assured - conforms to EN 15651-1:2012: Type F -INT The Fix ALL range of super strong sealant and adhesive We offer more versions of the super strong Fix ALL sealant and adhesive to suit very specific needs. Technical Information Fix ALL Turbo Compatibility All usual building substrates, natural stone, treated wood, PVC, plastics Can not be used as a glazing sealant Not suitable for bonding aquariums Can bond natural stone but should not be used as a joint sealant on them Porous surfaces in water loaded applications should be primed All smooth surfaces can be treated with Surface Activator As with all sealants, compatibility tests are recommended Fix ALL Turbo Technical Information Measurement Value Basis SMX Hybrid Polymer Consistancy Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 5 min Hardness 65 ± 5 Shore A Density Ca. 1,52 g/ml Elastic recovery (ISO 7389) > 75% Maximum allowed distortion ± 20% Temperature resistance -40°C → 90°C Max. tension (DIN 53504) 3,80 N/mm² Elasticity modulus 100% (DIN 53504) 3,00 N/mm² Elongation at break (DIN 53504) 200% Adjustable until Ca. 5 min Application Temperature 5°C → 35°C Colours White Volume 290ml Cartridge Type EU3 Application Standard skeleton gun * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

From £7.28*

Details

14" Fine Tooth Toolbox Saw

Bahco PrizeCut 14” General Purpose Toolbox Saw Smooth clean cuts on PVCu, aluminium, wood and more! Versatile general purpose saw with fine teeth for smooth sawing of a wide variety of materials, including PVCu, plastic, aluminium, laminates, wood and chipboard. A 360mm blade with compact overall length of 425mm and multi-purpose use makes this is the ideal toolbox saw. Features & Benefits Cut many materials including PVCu Fine 15 per inch toothing for smooth finish Hardpoint fleam toothing cuts cleaner and faster Comfortable screwed one-piece plastic handle Convenient 14” toolbox size Did you know? This saw is supplied with a simple snap-fit protective blade guard to prevent damage to teeth when not in use. Technical Information MeasurementValue Blade Length 360mm (14") Blade Thickness .75mm Teeth 15 per inch / 16 points per inch Application PVCu, Plastic, Aluminium, Wood, Laminate, Chipboard Weight 225g

From £6.17*

Details

Soudal Trade Multi-Purpose Silicone

Soudal Trade Multi-Purpose Silicone Joint Sealant (Choice of colour available) Low-cost general silicone for the trade! Multi-purpose silicone joint sealant that forms a flexible and durable weathertight seal on many common building surfaces. Soudal Trade Multi-Purpose Silicone is an acetoxy silicone sealant with anti-mould fungicides and can be used on many surfaces, including glass, metals, wood, ceramic tiles and more. Features & Benefits Provides a durable weathertight seal Remains flexible after curing Use with glass, metals, wood and ceramic tile Contains fungicide to resist mould growth Permanent colour, UV resistant Acetoxy silicone sealant This is a handy low-cost silicone for general construction, masonry, woodworking, roofing, flooring, bathrooms, kitchens and more. Technical Information Soudal Multi-Purpose Silicone Technical Information MeasurementValue Basis Polysiloxane Consistency Stable paste Curing system Moisture curing Skin formation* (20°C / 65% R.H.) Ca. 7min Curing speed * (20°C / 65% R.H.) Ca. 2mm/24h Hardness 25 ± 5 Shore A Specific gravity (DIN 53479) Ca. 1,00g/ml Elastic recovery (ISO 7389) > 90% Maximum allowed distortion 25% Temperature resistance -60°C → 180°C Max. tension (DIN 53504) 1,50N/mm² Elasticity modulus 100% (DIN 53504) 0,40N/mm² Elongation at break (DIN 53504) 800% Application Temperature 5°C → 35°C Colours Brilliant White, Clear, Brown, Black, Grey Volume 270ml Cartridge Type EU3 cartridge with nozzle Application Standard skeleton gun Joint Dimensions Minimum width: 5mm Maximum width: 30mm Minimum depth: 5mm Recommendation: 2 x depth = width of joint * These values may vary depending on environmental factors such as temperature, moisture, and type of substrates.

Variants from £2.55*

£2.81*

Details

Accessory Items

Quadrant Bead uPVC Plastic Window Door Floor Trim

Quadrant Bead (2.5m)

Quadrant Bead Convex Finishing Trim (Choice of width and colour) Creates a neater and softer appearance! Multi-purpose uPVC foam quadrant beads with a tough laminated foil that matches popular window profile. Covers unsightly internal corners and creates a neat professional finish around windows, laminate flooring and more. Available in choice of width and colour. These tough and durable plastic trims have a rounded convex shape, which softens the appearance of internal corners, and a chamfered inside edge that means it can fit tighter into corners with existing silicone or caulk. Features & Benefits Softens appearance - attractive rounded profile Fits neater - chamfered rear edge for tighter fit Quick and easy fitting - cut with gasket shears or saw, and then stick Highly versatile - ideal for windows, doors, laminate floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width (Radius) 13mm or 17.5mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Quadrant convex front edge and chamfered rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of uPVC Quadrant Bead Fitting the plastic quad trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £1.39*

£4.54*

Details

20mm x 15mm Chamfered Bead

20mm x 15mm Chamfered Bead Finishing Trim (Available in choice of colours) Modern decorative finish for internal corners! Plastic PVCu bead with chamfered face for adding a durable and attractive linear finish around windows, flooring and more. Available with tough laminated foil to match popular window profile colours. Features an adhesive channel along the underside, which provides a good contact area for stronger grip, whilst still allowing the bead to sit flat. Adhesive is kept away from visible edges, so gives a neater finish. This 20mm x 15mm extrusion primarily used as a bead for internal corners around uPVC windows and doors, but can be used for multiple other purposes around the home. Features & Benefits Modern appearance - chamfered for a fresh look Cleaner fixing - adhesive channel on underside Quick and easy fitting - simply cut to length and stick Highly versatile - ideal for windows, doors, floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm Height 15mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rectangular with triangle section cut from one corner. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of 20mm x 15mm Chamfered Bead Fitting the plastic chamfered window finishing trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting of plastic trims, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. The cutout channel on the underside can be used to apply a bead of adhesive along the length. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £3.16*

£6.55*

Details

5m Long Pencil-Round Architrave uPVC Plastic Window Finishing Trim

Pencil Round Architrave (5m)

Architrave Finishing Trim for uPVC Plastic Windows (5m Long, choice of width and colour) Multi-purpose architrave with many uses! Versatile pencil-round architrave window and door finishing trim. Durable 6mm thick, 5m long flat moulding fits easily to frame or wall reveal to conceal unsightly joints. Available in a range of width and colour to suit existing profiles. Features a square back edge and an attractive rounded front edge that creates a neat professional finish on frame or reveal. Features & Benefits Attractive finish - front edge rounds neatly onto frame or reveal Quick and easy fitting - cut with gasket shears or saw, and then stick Not just internal corners - square rear edge allows use as traditional architrave Wide colour choice - available in popular window and door profile colours Reduces maintenance - removes need for painting and easy to clean IMPORTANT: For transportation purposes, individual 5m lengths may be supplied coiled into a smaller package, which helps to protect the product and reduce delivery costs. To encourage the trims to regain their flat state, it is important that they are released from their coil as soon as possible. We recommend this is done on day of delivery, and that weight is placed evenly along its length. These trims are also available in shorter 2.5m lengths, which are not coiled for delivery. Refer to related products to buy the shorter lengths. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 45mm, 65mm and 95mm Thckness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rounded front edge and square rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of Pencil-Round Architrave Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £5.39*

£12.36*

Details

Tip

Rigid Angle uPVC Plastic L-Shaped Corner Trim (5m)

Rigid Angle 90° Corner Trim (5m)

Rigid Angle uPVC Corner Trim (5m) (Choice of size and colour) Strong neat finish to external corners! Durable rigid angle cover trim, for concealing unsightly joints and preventing ingress of water and debris on 90° external corners. Long-lasting, maintenance-free uPVC plastic angle bead, in various colours and sizes. These L-shaped rigid angles have high impact strength, yet remain lightweight, so easy to handle and fit. All sizes are offered as solid extrusions, with the 100mm x 80mm also available as a 6mm hollow board. Features & Benefits Tough and durable - protects external corners Professional finish - conceal unsightly corners Quick and easy fitting - simply cut, and stick Interior or exterior use - exterior grade uPVC Reduces maintenance - no painting and easy clean Did you know? We also sell these rigid angles in shorter lengths, for your convenience and cost saving. Alternative lengths include 1m (3ft 3in), and 2.5m (8ft 2in). Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Profile Size 25mm x 25mm, 40mm x 40mm, 60mm x 60mm, 80mm x 80mm, 100mm x 80mm. All offered as solid profile, with 100mm x 80mm also available as hollow. Profile Thickness 3mm (60 x 60, 80 x 80, 100 x 80 solid profile), 1.5mm (25 x 25 and 40 x 40 solid profile), 6mm (hollow profile) Length 5m (16ft 5in). Available as 1m (3ft 3in), and 2.5m (8ft 2in) in other listings. Colours White (64), Irish Oak (WLO1), Golden Oak (WO), Rosewood (RO), Anthracite Grey (WGY1S), Black Ash (WY) Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting uPVC Plastic Rigid Angle Fitting the rigid angle is quick and easy. If you haven’t fitted them before, the following key points may be helpful: For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. It is often recommended that only one internal face is stuck, as this allows for expansion and contraction, without risk of the trim splitting. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £6.00*

£12.41*

Details

20mm Square Section uPVC Plastic Window Door Finishing Bead Trim

20mm Square Trim (2.5m)

20mm Square Bead Finishing Trim (2.5m long, in choice of colour) Add detail whilst concealing unsightly corners! Square section uPVC foam bead adds attractive detail to internal corners when used as a window finishing trim. Durable, maintenance-free and available with tough laminated foil to match popular window profile colours. Features a small chamfered edge, which allows a bead of fixing adhesive to be applied away from visible edges, for a neater finish. This 20mm square trim is primarily used as an internal corner trim to finish the installation of uPVC windows, but can be used for countless other purposes around the home. Features & Benefits Add detail and interest - attractive square profile trim Neater fit - chamfered corner for flatter cleaner fixing Quick and easy fitting - simply cut to length and stick Highly versatile - ideal for windows, doors, laminate floors, and more Reduces maintenance - No need to paint and easy to clean Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm Height 20mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile 20mm square section with small chamfer to one corner. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of uPVC 20mm Square Bead Fitting the plastic square section window finishing trims is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims, and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting of plastic trims, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double-sided tape. The chamfered corner can be used to apply a bead of adhesive along the length. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £3.78*

£8.82*

Details

5m Long Cloaking Fillet uPVC Plastic Window Door Architrave Trim

Cloaking Fillet Architrave (5m)

5m Long uPVC Plastic Cloaking Fillet Windows Trim (Choice of width and colour) Provides a neater and tighter fit! Durable and easy-to-fit, 6mm thick, 5m long cloaking fillet with rounded front edge and chamfered rear edge. Provides a neat internal or external finish around uPVC windows, doors and more. Available in a wide range of colours at 20mm, and the more popular 30mm widths. Cloaking Fillets are similar to 6mm pencil round architrave trims, but are narrower (20mm or 300mm wide) and feature a chamfered rear edge. It is the chamfered rear edge that makes them more suitable for covering silicone beads and internal corners, whilst ensuring a neat professional finish. Features & Benefits Attractive finish - front edge rounds neatly onto frame Easier and cleaner fit - chamfered rear edge means tighter fitting to wall Quick and easy fitting - cut with gasket shears or saw, and then stick Highly versatile - perfect trim for windows, doors, laminate floors, and more Reduces maintenance - removes need for painting and easy to clean IMPORTANT: For transportation purposes, individual 5m lengths may be supplied coiled into a smaller package, which helps to protect the product and reduce delivery costs. To encourage the trims to regain their flat state, it is important that they are released from their coil as soon as possible. We recommend this is done on day of delivery, and that weight is placed evenly along its length. These trims are also available in shorter 2.5m lengths, which are not coiled for delivery. Refer to related products to buy the shorter lengths. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 20mm or 30mm Thckness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile Rounded front edge and chamfered rear edge. Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic Cloaking Fillet Fitting the cloaking fillet is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £3.96*

£9.17*

Details

25mm x 5m D-Mould PVC Window Trim Plastic Finishing Strip

25mm D-Mould Architrave (5m)

25mm D-Mould Architrave Window Trim Finishing Strip (5m long, in choice of colours) Looks great from both sides of joint! Tough 25mm wide, 5m long plastic d-section, rounded along both edges, d-mould is perfect for concealing butted joints on uPVC windows frames and when both edges will be visible. Available in a wide range of colours to match existing frames. D-moulding is commonly used to conceal joints between frames and can be fitted quickly an easily to give a neat professional finish. Features & Benefits Twin-edged profile - both edges round neatly onto surface frame Quick and easy fitting - cut with gasket shears or saw, and then stick Wide colour choice - available in popular window and door profile colours Fitters favourite - one product can be used for many purposes Reduces maintenance - removes need for painting and easy to clean DID YOU KNOW? This uPVC plastic cloaking fillet trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 25mm (1in) Thickness 6mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Agate Grey - WGY4, Anthracite Grey Grained - GRW7016 (RAL 7016), Anthracite Grey Smooth - WGY1S (RAL 7016), Black Ash - WY, Chartwell Green - WT1, Cream - WCR1379, Golden Oak - WO, Irish Oak - WLO1, Rosewood - RO, White - 64, White Ash - WZ Profile D-section, rounded along both edges Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic D-Mould Fitting the d-moulding window finishing trim is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £3.53*

£8.64*

Details

Flexi Angle Corner Trim (2.5m)

Flexi Angle Adjustable uPVC Corner Trim (2.5m) (Choice of width and colour) Highly versatile and adjustable! Tough uPVC flexible angle finishing trims for neat corner protection and concealment, internally and externally. Supplied as a short 2.5m (8ft 2in) length, with highly adjustable angle from 0-180°, and available in choice of width and colour. Formed from tough 2mm thick exterior grade uPVC, with a central crease along length. Simply fold to desired angle and fit. Protects external corners from impact, covers unsightly internal/external corners and offers attractive, maintenance-free long-lasting defence against ingress of water and debris when used externally. Features & Benefits Any angle usage - tightly flexible from 0° to 180° Professional finish - conseal unqightly corners Tough and durable - protects external corners Quick and easy fitting - cut, fold to angle and stick Internal or external use - exterior grade uPVC Reduces maintenance - no painting and easy clean High quality material means that the flexi angle can be finely adjusted from 0° to 180° and will retain the adjustment you set. Did you know? This uPVC flexi angle corner trim is also available in longer 5m lengths that can be supplied coiled in a smaller package, which can be more economical. See our separate listing for 5m trims. Technical Information MeasurementValue Material uPVC plastic (some colours laminated) Width 50mm (25mm folded), 70mm (35mm folded), 100mm (50mm folded) Thckness 2mm Length 2.5m (8ft 2in), or 5m (16ft 5in) Colours Anthracite Grey - WGY1 (RAL 7016), Black Ash - WY, Golden Oak - WO, Rosewood - RO, White - 64 Accreditations BSI Approved Guarantee 20 Years Colour-fastness (white), 10 Years Colour-fastness (laminated) Fitting of plastic Flexi Angle corner trims Fitting the flexi angle is quick and easy. If you haven’t fitted them before, the following key points may be helpful: If you have ordered longer 5m trims and they have arrived coiled, you should unroll them immediately and place them on a flat surface with weight evenly spread across the length. This will help to ensure that the trim returns fully to its flat state, before cutting and fitting. For cutting, we recommend the use of gasket shears, or junior hacksaw. Simply fold along crease to desired angle. You can use the corner that you’re covering to help form the angle. Stick with superglue (use of an activator spray will help the trim adhere quickly), contact adhesive such as Saves Nails or Fix ALL, or a double sided tape. Once fixed, you may wish to seal the edges, with silicone for external use, and a caulk for internal use. Future cleaning should require no more than a wipe with warm soapy water.

Variants from £5.14*

£11.69*

Details