Klober Uni-Click Dry Verge Unit (Right)
Product information "Klober Uni-Click Dry Verge Unit (Right)"
Same trusted brand - new easy-fit design!
Same trusted brand - new easy-fit design!
Manufactured by Klober, a leader in roof products, versatile Uni-Click dry verge units can be used with 260-350mm batten gauge on new build or existing roofs between 12.5° to 90° pitch.
Uni-Click is the easy-fit successor to the Uni-Dry system from Klober. Uses the same Eaves Ridge Pack and Ridge End Caps but units are not compatible with older Uni-Dry system and can't be used together.
Features & Benefits
- Quick fit system - no special tools, just click in to place and nail
- Resistance to Tile Uplift - roof tiles held firm, even in strong winds
- Zero maintenance - years of mortar free protection
- High quality - tough and UV stable plastic
- Mortar-Free - not affected by expansion/contraction and sever weather
- Mechanical Fixings - fit with reliable fixings in any conditions
Quick and Easy Fitting
The following provides a summary of the recommended steps for typical fitting of the Klober Uni-Click dry verge system.
- Prepare verge by removing any old mortar between the tiles and undercloak
- Fit Batten End Clip to end of every batten (extend tile battens 20mm beyond gable wall or bargeboard if required).
- Fit Eaves Closure to end of fascia board or brickwork
- Fit Eaves Closure to end of fascia board or brickwork
- Fit subsequent units (one per roof tile) until reach ridge. 1.Hooking under to engage with previous. 2. Click it over top of previous. 3. Slide up into position - inline with roof tile. 4. Nail to batten through batten end clip
- Insert Ridge Closure into last unit.
- The combs of the left and right Ridge Closure should interlock at the apex.
- Screw the Ridge End Cap to the ridge batten.
Login
Accessory Items
Klober Contract Dry Verge Units
£1.70*
Contract Grade Dry Verge Units from Klober
(Choice of side, colour and pack size)
Lower cost unit for big project savings!
Tough polypropylene plastic dry verge units for securing concrete interlocking verge tiles without mortar, quickly and easily. Just hook, clip, and slide to fit, then nail. Suitable for new or old roofs, with minimum pitch of 12.5°, and batten gauge of 260-350mm.
Contract Dry Verge Units are manufactured by Klober, and are compatible with their Uni-Ridge Half Round End Cap (KR9772), Universal Angle End Cap (KR9773), Eave Ridge Pack (KR9733) and Batten End Clips (KR977100).
Features & Benefits
Quick and easy fitting - just hook, clip, slide and nail
Resistance to tile uplift - holds tiles firmly, even in strong winds
Weatherproof and maintenance free - years of mortar free protection
Mortar-free system - not affected by expansion/contraction
Highly compatible - use with interlocking concrete tile
Variable batten gauge - suitable for 260-350mm gauge
Improved weatherproofing - drip ridge keeps water away from gable
British Standard compliant - meets regulations including BS 8612
Technical Information
Measurement
Value
Usage
Piched roof with concrete interlocking tile
Batten Spacing
260-350mm
Pitch
12.5° to 90°
Size (l x w x d)
397mm x 139mm x 59mm
Material
Polypropylene
Colour
Grey or Brown
Weight
174g
Certification
Complies to BS 5534 and BS 8612 for cold and warm roof application
Guarantee
10 years
Size of Klober Contract Dry Verge Unit
Fitting Klober Contract Dry Verge
The following provides a summary of the recommended steps for typical instillation of the Klober Contract Dry Verge system.
* We recommend 3.25mm ring shank nails of at least 40mm in length.
Prepare verge by removing any old mortar between the tiles and undercloak.
Tile battens should extend 30mm beyond gable wall or bargeboard, or 20mm if using Batten End Clips.
Fit Eaves Closure to provide fixing point for first verge unit.
Fit subsequent units (one per roof tile) towards the ridge. 1) Hooking under to engage with previous. 2) Click it over top of previous. 3) Slide up into position - inline with roof tile) 4. Nail to batten or batten end clip
Insert Ridge Closure into last unit.
The combs of the left and right Ridge Closure should interlock at the apex.
Screw the Ridge End Cap to the ridge batten.
Variants from £1.54*
Accessory Items
Klober Dry Verge Batten End Clips (10 Pack)
£5.29*
Pack of 10 Klober Batten End Clips
Fitted Klober Verge Batten Clip
Diagram of Klober Batten Clip
Stainless Steel Batten Fixing
Pack of 10
For the Klober Dry Verge System
Pack of 10, stainless steel batten end clips allows strong secure fixing of Klober Dry Verge units without nailing into end grain of the battens.
Compliment Klober's dry verge system of durable, interlocking uPVC units. As well as being attractive and hard wearing Klober dry verge is versatile, with an interlocking range of 65mm, allowing units to be evenly spaced along the verge.
Features & Benefits
Stainless Steel - excellent corrosion resistance
Pre-drilled holes - easy fixing
Stronger fixing - more secure fitting
Technical Information
MeasurementValue
Pack Size
10 x batten clips
Material
Stainless Steel
Fitting the batten end clips
Ensure that the batten overhangs the roofing material by 30mm. Then place batten end clip on top of batten with the hook downwards and against the end of the batten. Secure clip with suitable fixing through pre-drilled fixing holes.
Once dry verge units are positioned, fixings can be made through the unit and into the fixing slot of the batten end clip.
Klober Dry Verge Eaves Ridge Pack
£5.24*
Pair of Dry Verge Eaves and Ridge Closures
(Slate Grey, Brown, Black or Terracotta)
Compatible with popular Klober Dry Verge systems!
This Eaves Ridge Pack is designed for use with the Uni-Dry, Uni-Click, and Contractor dry verge manufactured by Klober, a leader in roof ventilation and accessory products.
The pack includes everything needed to finish off verges of one complete gable end. It includes two Eaves Closures, also known as Starter Blocks and two Ridge Closures. The closures are made from hard-wearing uPVC and provide a secure mechanical fixing of Uni-Dry Verge Units.
Features & Benefits
Easy Installation - No Mortar Needed
Contains Everything Needed to Finish Off Verges of One Gable End
About the Klober Dry Verge System
Klober Uni-Dry, Uni-Click, and Contractor dry verge is designed to provide a mortar-free, maintenance-free, secure method of fixing concrete interlocking verge tiles. Klober dry verge can be retro fitted to existing buildings and are equally effective when fitted to new properties.
Variants from £4.24*