Klober Contract Dry Verge Units
| Quantity | Unit price |
|---|---|
| To 7 |
£1.70*
|
| To 23 |
£1.70*
|
| To 49 |
£1.64*
|
| From 50 |
£1.54*
|
Product number:
KLO-2117-1001
Product information "Klober Contract Dry Verge Units"
Contract Grade Dry Verge Units from Klober
Lower cost unit for big project savings!
Tough polypropylene plastic dry verge units for securing concrete interlocking verge tiles without mortar, quickly and easily. Just hook, clip, and slide to fit, then nail. Suitable for new or old roofs, with minimum pitch of 12.5°, and batten gauge of 260-350mm.
Contract Dry Verge Units are manufactured by Klober, and are compatible with their Uni-Ridge Half Round End Cap (KR9772), Universal Angle End Cap (KR9773), Eave Ridge Pack (KR9733) and Batten End Clips (KR977100).
Features & Benefits
- Quick and easy fitting - just hook, clip, slide and nail
- Resistance to tile uplift - holds tiles firmly, even in strong winds
- Weatherproof and maintenance free - years of mortar free protection
- Mortar-free system - not affected by expansion/contraction
- Highly compatible - use with interlocking concrete tile
- Variable batten gauge - suitable for 260-350mm gauge
- Improved weatherproofing - drip ridge keeps water away from gable
- British Standard compliant - meets regulations including BS 8612
Technical Information
| Measurement | Value |
| Usage | Piched roof with concrete interlocking tile |
| Batten Spacing | 260-350mm |
| Pitch | 12.5° to 90° |
| Size (l x w x d) | 397mm x 139mm x 59mm |
| Material | Polypropylene |
| Colour | Grey or Brown |
| Weight | 174g |
| Certification | Complies to BS 5534 and BS 8612 for cold and warm roof application |
| Guarantee | 10 years |
Size of Klober Contract Dry Verge Unit
Fitting Klober Contract Dry Verge
The following provides a summary of the recommended steps for typical instillation of the Klober Contract Dry Verge system.
* We recommend 3.25mm ring shank nails of at least 40mm in length.
- Prepare verge by removing any old mortar between the tiles and undercloak.
- Tile battens should extend 30mm beyond gable wall or bargeboard, or 20mm if using Batten End Clips.
- Fit Eaves Closure to provide fixing point for first verge unit.
- Fit subsequent units (one per roof tile) towards the ridge. 1) Hooking under to engage with previous. 2) Click it over top of previous. 3) Slide up into position - inline with roof tile) 4. Nail to batten or batten end clip
- Insert Ridge Closure into last unit.
- The combs of the left and right Ridge Closure should interlock at the apex.
- Screw the Ridge End Cap to the ridge batten.
Login
Accessory Items
Klober Uni-Click Dry Verge Unit (Left)
£2.21*
Klober Uni-Click Dry Verge Unit Plastic Roof Edge (Left)
Black, Brown, Slate Grey and Terracotta
Same trusted brand - new easy-fit design!
Tough and UV stable left hand dry verge units fit quickly and neatly to provide attractive, mortar-free securing of most makes and profiles of concrete tile.
Manufactured by Klober, a leader in roof products, versatile Uni-Click dry verge units can be used with 260-350mm batten gauge on new build or existing roofs between 12.5° to 90° pitch.
Uni-Click is the easy-fit successor to the Uni-Dry system from Klober. Uses the same Eaves Ridge Pack and Ridge End Caps but units are not compatible with older Uni-Dry system and can't be used together.
Features & Benefits
Quick fit system - no special tools, just click in to place and nail
Resistance to Tile Uplift - roof tiles held firm, even in strong winds
Zero maintenance - years of mortar free protection
High quality - tough and UV stable plastic
Mortar-Free - not affected by expansion/contraction and sever weather
Mechanical Fixings - fit with reliable fixings in any conditions
Quick and Easy Fitting
The following provides a summary of the recommended steps for typical fitting of the Klober Uni-Click dry verge system.
Prepare verge by removing any old mortar between the tiles and undercloak
Fit Batten End Clip to end of every batten (extend tile battens 20mm beyond gable wall or bargeboard if required).
Fit Eaves Closure to end of fascia board or brickwork
Fit Eaves Closure to end of fascia board or brickwork
Fit subsequent units (one per roof tile) until reach ridge. 1.Hooking under to engage with previous. 2. Click it over top of previous. 3. Slide up into position - inline with roof tile. 4. Nail to batten through batten end clip
Insert Ridge Closure into last unit.
The combs of the left and right Ridge Closure should interlock at the apex.
Screw the Ridge End Cap to the ridge batten.
Klober Uni-Click Dry Verge Unit (Right)
£2.21*
Black, Brown, Slate Grey and Terracotta
Same trusted brand - new easy-fit design!
Same trusted brand - new easy-fit design!
Manufactured by Klober, a leader in roof products, versatile Uni-Click dry verge units can be used with 260-350mm batten gauge on new build or existing roofs between 12.5° to 90° pitch.
Uni-Click is the easy-fit successor to the Uni-Dry system from Klober. Uses the same Eaves Ridge Pack and Ridge End Caps but units are not compatible with older Uni-Dry system and can't be used together.
Features & Benefits
Quick fit system - no special tools, just click in to place and nail
Resistance to Tile Uplift - roof tiles held firm, even in strong winds
Zero maintenance - years of mortar free protection
High quality - tough and UV stable plastic
Mortar-Free - not affected by expansion/contraction and sever weather
Mechanical Fixings - fit with reliable fixings in any conditions
Quick and Easy Fitting
The following provides a summary of the recommended steps for typical fitting of the Klober Uni-Click dry verge system.
Prepare verge by removing any old mortar between the tiles and undercloak
Fit Batten End Clip to end of every batten (extend tile battens 20mm beyond gable wall or bargeboard if required).
Fit Eaves Closure to end of fascia board or brickwork
Fit Eaves Closure to end of fascia board or brickwork
Fit subsequent units (one per roof tile) until reach ridge. 1.Hooking under to engage with previous. 2. Click it over top of previous. 3. Slide up into position - inline with roof tile. 4. Nail to batten through batten end clip
Insert Ridge Closure into last unit.
The combs of the left and right Ridge Closure should interlock at the apex.
Screw the Ridge End Cap to the ridge batten.
Accessory Items
Klober Dry Verge Batten End Clips (10 Pack)
£5.29*
Pack of 10 Klober Batten End Clips
Fitted Klober Verge Batten Clip
Diagram of Klober Batten Clip
Stainless Steel Batten Fixing
Pack of 10
For the Klober Dry Verge System
Pack of 10, stainless steel batten end clips allows strong secure fixing of Klober Dry Verge units without nailing into end grain of the battens.
Compliment Klober's dry verge system of durable, interlocking uPVC units. As well as being attractive and hard wearing Klober dry verge is versatile, with an interlocking range of 65mm, allowing units to be evenly spaced along the verge.
Features & Benefits
Stainless Steel - excellent corrosion resistance
Pre-drilled holes - easy fixing
Stronger fixing - more secure fitting
Technical Information
MeasurementValue
Pack Size
10 x batten clips
Material
Stainless Steel
Fitting the batten end clips
Ensure that the batten overhangs the roofing material by 30mm. Then place batten end clip on top of batten with the hook downwards and against the end of the batten. Secure clip with suitable fixing through pre-drilled fixing holes.
Once dry verge units are positioned, fixings can be made through the unit and into the fixing slot of the batten end clip.
Klober Dry Verge Domed Half Round Ridge End Cap
£5.60*
Dry Verge Ridge End Cap - Half Round
Brown, Slate Grey or Terracotta
Comaptible with Uni-Dry and Uni-Click systems!
These polypropylene dry verge ridge end caps are designed specifically for use with the Uni-Dry and Uni-Click dry verge systems manufactured by Klober, a leader in professional roof ventilation and accessories. If you're looking for a quality product that you can trust, look no further than Klober.
Half Round
The domed top of the Half Round Ridge End Cap provides a neat finish that compliments round ridge roofs. The end cap is 270mm across at the widest point, 244mm height and has a return of 58mm.
Features & Benefits
Maintenance free and UV safe
Neat, weatherproof appearance
Fits Uni-Dry Verge system
Caps ridge tiles and seals End Closures
Easy installation - instructions included
No mortar or special tools required
Use with universal angled ridge tiles and rounded
About the Klober Uni-Dry Verge System
The Uni-Dry Verge system is deisnged to provide a mortar-free, maintenance-free, secure method of fixing concrete interlocking verge tiles. The Uni-Dry Verge system can be retro fitted to existing buildings and are equally effective when fitted to new properties.
Variants from £4.52*
Klober Dry Verge Eaves Ridge Pack
£5.24*
Pair of Dry Verge Eaves and Ridge Closures
(Slate Grey, Brown, Black or Terracotta)
Compatible with popular Klober Dry Verge systems!
This Eaves Ridge Pack is designed for use with the Uni-Dry, Uni-Click, and Contractor dry verge manufactured by Klober, a leader in roof ventilation and accessory products.
The pack includes everything needed to finish off verges of one complete gable end. It includes two Eaves Closures, also known as Starter Blocks and two Ridge Closures. The closures are made from hard-wearing uPVC and provide a secure mechanical fixing of Uni-Dry Verge Units.
Features & Benefits
Easy Installation - No Mortar Needed
Contains Everything Needed to Finish Off Verges of One Gable End
About the Klober Dry Verge System
Klober Uni-Dry, Uni-Click, and Contractor dry verge is designed to provide a mortar-free, maintenance-free, secure method of fixing concrete interlocking verge tiles. Klober dry verge can be retro fitted to existing buildings and are equally effective when fitted to new properties.
Variants from £4.24*
Klober Dry Verge Univeral Angle Ridge End Cap
£5.60*
Dry Verge Ridge End Cap - Universal Angle
(Brown, Slate Grey or Terracotta)
Comaptible with Uni-Dry and Uni-Click systems!
These polypropylene dry verge ridge end caps are designed specifically for use with the Uni-Dry and Uni-Click dry verge systems manufactured by Klober, a leader in professional roof ventilation and accessories. If you're looking for a quality product that you can trust, look no further than Klober.
Klober produce two styles of hardwearing and UV safe ridge end caps, these are the Half Round and the Universal Angle. So you can be certain that there is a style to suit your property.
Universal Angle
The angled top of the Univeral Angle Ridge End Cap can be used with both standard ridge and round ridge roofs. The end cap measures 270mm across at the widest point, 244mm height and 58mm return.
Features & Benefits
Maintenance free and UV safe
Neat, weatherproof appearance
Fits Uni-Dry Verge system
Caps ridge tiles and seals End Closures
Easy installation - instructions included
No mortar or special tools required
Use with universal angled ridge tiles and rounded
About the Klober Uni-Dry Verge System
The Uni-Dry Verge system is deisnged to provide a mortar-free, maintenance-free, secure method of fixing concrete interlocking verge tiles. The Uni-Dry Verge system can be retro fitted to existing buildings and are equally effective when fitted to new properties.
Variants from £4.52*