6.5mm SDS Masonry Hammer Drill Bit

Quantity	Unit price
To 4	£1.99*
From 5	£1.77*

Prices incl. VAT plus shipping costs

No longer available

Length

160mm

210mm

250mm

Product number: DEL-1479-1001

Product information "6.5mm SDS Masonry Hammer Drill Bit"

SDS Plus Masonry Hammer Drill Bits - 6.5

(Available in overall length of 160mm, 210mm and 250mm)

Get a drill bit designed for the job!

A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure).

Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy.

The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank.

Features & Benefits

High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide
160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect
Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry
Strengthened Core - ensures optimum transfer of hammering, stability and strength
Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction
Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning
Heat Treated - for extra strength and longevity

Technical Information

Specification Summary:

Width option	5mm	5.5mm	6mm	6.5mm	7mm	8mm	10mm	12mm
Length	110mm, 160mm, 210mm & 250mm (overall including the shank)
Drill tip type	High Grade Sintered Carbide Tip
Shank fitting	SDS + (plus) fitting and SDS

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Display reviews in current language only.

No reviews found. Be the first to share your insights.

Accessory Items

6mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits 6mm (Available in overall length of 110mm, 160mm and 260mm) Get a drill bit designed for the job! A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £1.59*

£1.79*

Details

8mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits - 8mm (Available in overall length of 160mm and 210mm) Get a drill bit designed for the job A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £1.82*

£2.05*

Details

12mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits -12mm (Available in overall length of 160mm and 210mm) Get a drill bit designed for the job! A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £2.11*

£2.38*

Details

5.5mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits - 5.5 (Available in overall length of 160mm, 210mm & 250mm) Get a drill bit designed for the job! A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £1.50*

£1.68*

Details

7mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits 7mm (Available in overall length of 160mm and 210mm) SDS Plus Masonry Hammer Drill Bits A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc. Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £1.77*

£1.99*

Details

10mm SDS Masonry Hammer Drill Bit

SDS Plus Masonry Hammer Drill Bits - 10mm (Available in overall length of 160mm and 210mm) Get a drill bit designed for the job! A wide range of high quality Sintered Carbide SDS Plus Masonry Hammer Drill Bits. SDS plus drill bits have a special shank with keyways to support the extra torque a SDS Plus drill provides. Narrow side edges reduce resistance. SDS comes from the German "Stecken Drehen Sichern" (Insert Twist Secure). Suitable for drilling concrete, blockwork, natural stone, solid or perforated bricks, hollow blocks etc... Whether you're drilling holes for anchors or fixings, cable or pipe bases, these convenient SDS plus masonry drill bits will come in handy. The SDS + (plus) shank has the advantage of fitting into a simple spring-loaded chuck, so that bits are simply pushed into the chuck without tightening. This shank and chucks made for it are especially suited to hammer drilling with masonry drills in stone and concrete. The drill bit is not held solidly in the chuck, but can slide back and forth like a piston; it does not slip during rotation due to the non-circular shank cross-section, matching the chuck. The hammer of the drill acts to accelerate only the drill bit itself, and not the large mass of the chuck, which makes hammer drilling with an SDS shank drill bit much more productive than with other types of shank. Features & Benefits High Grade Sintered Carbide Tip - heavy duty strike resistant tip made of sintered carbide 160° Shallow Nose Angle - provides the optimum angle for penetration and chiselling effect Deep flutes - provide optimum removal of dust and debris via rounded spiral geometry Strengthened Core - ensures optimum transfer of hammering, stability and strength Certified OPERC* & DIN 8035 - ensuring perfect quality, drilling speed and vibration reduction Stops Drill Bit Sticktion - stops the drill bit sticking in the substrate whilst the drill is spinning Heat Treated - for extra strength and longevity Technical Information Specification Summary: Width option 5mm 5.5mm 6mm 6.5mm 7mm 8mm 10mm 12mm Length 110mm, 160mm, 210mm & 250mm(overall including the shank) Drill tip type High Grade Sintered Carbide Tip Shank fitting SDS + (plus) fitting and SDS

Variants from £2.11*

£2.38*

Details