10mm Over Fascia Eaves Vent
| Quantity | Unit price |
|---|---|
| To 4 |
£1.05*
|
| To 9 |
£0.95*
|
| To 14 |
£0.84*
|
| To 19 |
£0.74*
|
| To 24 |
£0.63*
|
| To 29 |
£0.57*
|
| From 30 |
£0.53*
|
10mm Over Fascia Eaves Vent
Onterlocking Eaves Vent
Screw holes in Over Fascia Vent
Simply click together
Application of Over Fascia Vent
Ventilated Over Fascia Eaves Vent
Increases airflow and reduces moisture in roof space!
1m (2 x 500mm) interlocking eaves vents. Provides equivalent of continuous 10mm opening for eaves ventilation.
Durable and discrete interlocking eaves vents provide continuous eaves ventilation to encourage airflow, allowing the roof to breathe and discourages birds and large insects.
Each lightweight polypropylene vent features stop beads that simplify the fitting to top edge of fascia board and integral nail holes for consistent and secure fixings.
Features & Benefits
- New-build and retro-fit to existing roofs
- Low profile design
- Extremely strong and lightweight
- 4mm integral grill
- Fixing location holes
- 10mm ventilation capacity (25mm capacity also available)
- Prevents birds and large insects accessing the roof
Why it's important to ventilate the roof
Inadequate ventilation in the roof space encourages moisture, which can damage roof timbers. All new-build properties must have continuous ventilation at eaves level to avoid damp and condensation within the roof void and to comply with Building Regulations.
Ventilation capacity
This 10mm capacity eaves vent is recommended for conventional cold roofs and provides the equivalent of a continuous 10mm opening. The 25mm capacity vent provides the equivalent of a continuous 25mm opening and should be chosen for warm roofs, flat roofs and roof with pitch less than 14°.
Technical Information
| Property | 10mm Vent* | 25mm Vent |
|---|---|---|
| Length | 1m (2 x 500mm interlocking sections) | |
| Depth | 39mm | 42mm |
| Height | 20mm | 30mm |
| Material | Co-Polymer Polypropylene | |
| Ventilation Capacity (per metre) | 10,000mm | 25,000mm |
| Related Products | Under Eaves Protector Felt Support Tray, Eaves Comb Filler, 2-in-1 Vented Eaves Protector | |
* This listing is for the 10mm capacity vent.
Installation
Position vent on top of fascia using locating fins on underside and nail to fascia through integrated fixing collars. Vent overhangs front of fascia to allow air in and out through grill at the rear. Adjacent vents simply click together for a secure joint.
Login
Accessory Items
